Install Instructions

(EZT113)

U.S. Patent Numbers 5,069,042 5,522,229

Mini Waterless

In-Line

Condensate Trap

Scan for more info

RectorSeal® 2601 Spenwick Drive - Houston, TX 77055

ph: 713.263.8001 - 800.231.3345 fax: 713.263.7577 - 800.441.0051

www.rectorseal.com - Like Us on Facebook

961735

Model No.

83180

(EZT180)

Kit Contents

Mini Trap (1)

Rubber Adaptor (1)

Cleaning Label (1)

0 2 1 4 4 9 8 3 1 8 0 2

LIMITED WARRANTY. RectorSeal

warrants to the original consumer purchaser (“Purchaser”)

of its product, EZ Trap

, that it is free from defects in material or workmanship. If within two years (24 months)

from the date of the original consumer purchase this product shall prove to be defective, it shall be repaired or replaced at

RectorSeal’s option. Your original receipt of purchase is required to determine warranty eligibility.

2 Year

PAGE 1
83180 Model No. (EZT180) (EZT113) U.S. Patent Numbers 5,069,042 5,522,229 ® Mini Waterless In-Line Condensate Trap Kit Contents Mini Trap (1) Rubber Adaptor (1) Cleaning Label (1) Scan for more info 2 Year LIMITED WARRANTY. RectorSeal ® warrants to the original consumer purchaser (“Purchaser”) of its product, EZ Trap®, that it is free from defects in material or workmanship.
PAGE 2
INSTALLATION INSTRUCTIONS EZT-180 1. Trap must be fitted at least 12” below indoor unit (Figure 1). 2. Ensure that Black Valve Assembly is perpendicular to or facing away from wall to facilitate cleaning. 3. For 5/8” (16mm) drain hose, insert end of upper drain hose into top of Trap (Wide End) and seat firmly (Figure 2). 4. For 9/16” (14mm) drain hose, insert Rubber Adaptor into top of Trap and insert hose into Adaptor and seat firmly (Figure 3).