Install Instructions

(EZT113)

U.S. Patent Numbers 5,069,042 5,522,229

Kit Contents

3/4″ Standard Trap (1)

3/4″ Cross (1)

3/4″ Tee (1)

Red Cap (1)

Brush Holder (1)

Float Switch Assembly (1)

72″ Modular Cable (1)

3/4″ Adaptor (1)

Cleaning Brush (1)

Red/Blue Service Label (1)

Yellow Cleaning Label (1)

3/4ʺ Condensate

Trap with Overow

Switch

1” DROP

RectorSeal® 2601 Spenwick Drive - Houston, TX 77055

ph: 713.263.8001 - 800.231.3345 fax: 713.263.7577 - 800.441.0051

www.rectorseal.com - Like Us on Facebook

Scan for more info

961755

0 2 1 4 4 9 8 3 2 1 0 6

Model No.

83210

(EZT210)

New!

Compact Modular

Switch Assembly

▼

LIMITED WARRANTY. RectorSeal

warrants to the original consumer purchaser (“Purchaser”)

of its product, EZ Trap

, that it is free from defects in material or workmanship. If within two years (24 months)

from the date of the original consumer purchase this product shall prove to be defective, it shall be repaired or replaced at

RectorSeal’s option. Your original receipt of purchase is required to determine warranty eligibility.

2 Year

PAGE 1
83210 Model No. (EZT210) (EZT113) U.S. Patent Numbers 5,069,042 5,522,229 ® 3/4ʺ Condensate Trap with Overflow Switch 1” DROP Kit Contents 3/4″ Standard Trap (1) 3/4″ Cross (1) 3/4″ Tee (1) Red Cap (1) Brush Holder (1) Float Switch Assembly (1) 72″ Modular Cable (1) 3/4″ Adaptor (1) Cleaning Brush (1) Red/Blue Service Label (1) Yellow Cleaning Label (1) New! Compact Modular Switch Assembly ▼ Scan for more info 2 Year LIMITED WARRANTY.
PAGE 2
A J Not included B Drain Pan Outlet G C D H E K Not included F 5° angle Important: Install in strict accordance with RectorSeal® instructions as well as all applicable local plumbing, drainage and electrical codes. Note: Insulation is required when trap is installed in unconditioned space where sweating can occur. 9. Attach service & cleaning labels as indicated. 8. Place brush into retaining hole on Brush Holder (K). 7.