Quick Start Guide

STOP---press to stop play cassette.
F.F---Fast forward.
REW---Rewind.
DIR---Change the direction of cassette playing.
Auto reverse switch---Slide to is auto reverse mode.
7, DC port----5V DC.
Operations Cassette:
Power supply:
1, You can simply use the USB cable in the package to power supply this device.
2, Or you can also use 2 AA batteries----Open the lid of the deck, and put batteries in the groove.
Operate:
3, Put a cassette in.
4, Connect a speaker or earphone to AUX of the device, or turn on a Bluetooth earphone or speaker.
5, Press PLAY button of the top, you should hear the sound from the cassette playing.
6, The LED should quick flash when you just connected power, device is searching the Bluetooth receivers.
If you turn on your Bluetooth earphone or speaker, they will pair successful after few seconds, and LED
should slow flash. And you should hear the sound from your Bluetooth receiver.
Additional Instructions for Bluetooth:
1, Device starts to search Bluetooth receivers when you connect power, and LED quick flashes.
2, Usually, device will pair successful after few seconds, and LED slow flashes.
3, If you d
minutes, it will stop search, and LED will turn off.
4, You should power off and power on to start searching Bluetooth receiver again when the LED is turn off.
Specifications:
Bluetooth 4.2
Effective Distance About 10m
Supporting Agreement A2DP, AVRCP, AVCTP, AVDTP, HFP, SPP, SMP, ATT, GAP,
GATT, RFCOMM, SDP, I2CAP
Signal-Noise Ratio 90db
Frequency Range 2.402GHz - 2.480GHz
Audio Channel Stereo L/R
Audio Input Cassette tape
Audio Output 3.5mm earphone jack, Bluetooth transmitter
User Interface
Control buttons: PLAY, STOP, F.F, REW, DIR. Auto reverse
switch, Volume control.
LED indicator: Quick flash for search Bluetooth receiver, slow
flash for pair successful.
Power supply 2*AA Battery, or USB port power supply (5V DC adapter)
Package Contents ezcap215 Bluetooth Cassette Player, USB power cable,
Earphone, Manual
Bit Rate 128Kbps
Dimensions 113 x 85 x 32 mm
Weight 180g