User's Manual

Warning:

Please don’ t click the “Reset All” select item; or you will lose all shortcut key

functions.

Note:

It is the best way of using the SEND key. You should press “Shift+Tab” to let the

cursor jump to “Subject” after completing your email edit, and then press the

“SEND” key. Otherwise the “SEND” sometimes fails to work.

How do I disable embed office key functions?

To disable the embed office key functions (function associated with keys F1-F12, Print), you should

press the office lock key and turn off office lock indicator. The functionality will be automatically

enabled when you power on PC or start Windows first time. The keyboard is capable to

remembering the office lock indicator status. So, if you turn off the office lock indicator first and

then reset the software by restarting Windows, the Office lock indicator status will stay the same

and not be turned on automatically. This feature will be supported by the ACPI PC system.

However, all modern PC systems include ACPI functionality already. When you turn off the PC

system or leave Windows, the power source still support Keyboard functions; thus the Keyboard

will keep the same status when the power is off. You can change the PC system BIOS default setup

to enable this feature. To enable this feature, you should be able to use the "POWER Key"

(included on the keyboard) to turn on and turn off Windows or PC.

Impossible to remove highlighting from target items

When you press the “Mark” key and roller keys to highlight the target items, the “Mark” key will

always be activated. Press Cut, Paste, Copy keys so as to edit your document- this will release the

“Mark” key function at same times. However, it is also possible to release the function of the

“Mark” key by pressing the “Esc” key.

The Pop-up function does not work