Smart Home Controller User Guide
Table of contents Chapter 1 Introduction Package contents Features LEDs Chapter 2 Initial Installation Requirements Procedure Chapter 3 Configuration Configuration Program Appendix A Specifications Regulatory Approvals User Guide 2
Chapter 1 Introduction This chapter provides an overview of the Ezlo Secure Gateway’s features and capabilities An always-on solution that works even in the event of a power or internet outage, the Ezlo Secure is a feature-rich control hub that keeps users in control of their home from anywhere, at any time. It offers control for Z-Wave, Zigbee, and 2GIG devices while also enabling control of Wi-Fi devices paired to Amazon Alexa or Google Assistant.
LEDs Top-mounted LEDs Booting / Power ON Red Booting recovery partition Red Slow blinking Booting application partition Green Blue Slow waving System has booted but firmware not started Yellow Firmware has started Blue Rear/Top Panel Power port Connect the supplied power adapter here Ethernet port Use a standard LAN cable (RJ45 connector) to connect your router to the port. USB Port The connector is a USB host with support for mass storage devices.
Chapter 2 Initial Installation This chapter covers the software installation of the Ezlo Secure Gateway. Requirements Use a standard 10/100/1000 BaseT network (UTP) cable with RJ45 connector Procedure LAN LAN Power Power Reset Connect the AC Power Adapter to your Ezlo Secure. Reset Connect your Ezlo Secure to your internet gateway using an Ethernet cable. 1. Choose an Installation Site Select a suitable place to install the Ezlo Secure Gateway. 2.
Chapter 3 Configuration This chapter provides Setup details of the System. Configuration Program The Ezlo Secure Gateway can offer customers seamless communication between devices while at home or away. This gateway is designed to provide complete connectivity with all certified devices including, security systems and ZigBee/ZWave/2GIG devices. Preparation 1.
Appendix A Specifications Ezlo Secure Model Ezlo Secure Dimensions 194x164x46 mm Operating Temperature 0 C to 40 C Buttons Functional button on the top surface and reset button on the back surface Network protocol TCP/IP Network Interface 1 * 10/100 BaseT (RJ45) LAN connection LEDs RGB led Power adapter 5V, 3A User Guide 7
Regulatory Approvals Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For indoor use only. Device does not operate in Band 5600-5650MHz.
Industry Canada Licence Exemption This device complies with Industry Canada licence-exempt RSS (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. For indoor use only. Device does not operate in Band 5600-5650MHz. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
