User Manual

1 Introduction
 This meter is designed for measuring and monitoring
electromagnetic field value of the Radio –Frequency
 The meter is calibrated precisely on the frequency value
2.45 GHZ
2 Application
 This meter is applied to measuring electromagnetic fields
of Radio –Frequency of normal or 2.45 GHZ
 It is capable of measuring the electromagnetic field
radiation intensity that is produced from cell-phone
station 、radar、TV antenna 、Radio station、welding
equipment 、microwave oven、computer and other
environment…etc.
3 Features
 Switch between 2.45 GHZ (microwave frequency) or
normal (50MHZ~3.5 GHZ).
 Data hold (HOLD)、maximum (MAX) Hold、minimum (MIN)
Hold、 Zero function.
 Measurement range of RF power density： 0.003~2.700m
W/cm^2。
 Build in alarm setting, when the measuring value is more
than 1mW/cm^2, the buzzer will sound
 Low battery detector “ ”.
 Auto power OFF function.
 Over load indication “OL”.