User Manual

5 Measurement Procedures
 Press button to power on.
 Press button test frequency to select 2.45 GHZ or
normal (50MHz to 3.5 GHz).
 Position the top (refer to Figure 1) of the meter to measure
the electromagnetic waves. Try to change the
measurement angle or position for obtaining the highest
reading value (please refer to Figure 2 to 6).
 Due to the environmental magnetic field factors, this
magnetic field meter could display a reading value that is
lower than 0.002 mW/cm^2 prior to measuring.
 To permanently lock and keep the reading displayed on
the LCD, press button or press button
again to unlock.
 To retain the maximum value, press button
and the reading value displayed on the LCD will keep
updating to the maximum value.