ezPoster User’s Manual Table of Content 1. SETTING UP ...................................................................................................................................... 2 1.1 FREE STANDING.................................................................................................................................. 2 1.2 WITH BASE STAND .............................................................................................................................. 2 1.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1. Setting up 1.1 Free Standing Place the device on a flat floor, fully Pull out the kick stand 1.2 With base stand Assemble the side plates onto the base plates with the screws provided. Assemble the tool-less bolts onto the ezPoster. Single-side installation position Double-side installation position 2 EXO Visual Inc www.exovisual.
1.3 With wall bracket Secure the wall bracket on the wall Secure the bolts on the device Hang the device onto the wall bracket After setting up the device Plug the power cable. Switch on the power button Power indicator light will turn on once power is on 2. Connecting to the ezPoster 2.1 Connect with USB cable Use the included USB Type A to Type B cable to connect the computer to the device, the device will show up in the software’s device list.
2.3 Connect through WiFi Router See software instruction network setting section 2.4 Connect through Ethernet See software instruction network setting section 3. Software Instructions 3.1 Windows Software Download the software from www.exovisual.com, and open the software. Connect the ezPoster with USB Type A - Type B cable or through other connection method. The connected ezPosters will show up in the Devices list. 3.1.1 Menu Introduction 3.1.1.1 Device, Device menu includes 3 functions 3.1.1.1.
3.1.1.2 Program , 3.1.1.2.1 Program management will lead to the programs window, with options to select previously uploaded program, add new program, or import program. 3.1.1.2.1.1 Select a program from the programs list to upload content to the ezPoster. Right click on the program to edit, delete, export the program, or export the program to USB Drive. 3.1.1.2.1.2 Import. To import the exported program and upload the program to an ezPoster. 5 EXO Visual Inc www.exovisual.
3.1.1.2.1.3 Add New. Name the program, then select target device from the dropdown list. Target devices are the ezPoster models. Once target device is selected, its resolution will be shown in the Width (xxx) Height(xxx) section. By default, the content will be applied to 1 ezPoster. Select more than 1 ezPoster wide from the width dropdown list to apply the program to a wider screen when needed. Click “+”and follow software guide to load picture/video from your computer.
WIFI Hotspot, each ezPoster has a built in WIFI hotspot which can be used as a WIFI access point for other ezPosters. SSID is the serial number of the ezPoster that is functioning as a hotspot for other ezPosters. Password is 123456789 by default. Password can be changed or might have been changed under “network settings.” WIFI network is the network with your target router. 3.1.1.5 Help. User Manual, software update information and About information can be found from the Help menu. 3.1.1.
3.1.3.4 Resolution The device’s resolution 3.1.4 Brightness Display and change the device’s brightness, the range is 0-100% To change the brightness, drag the slider and move to the new position, the new brightness will take effect when you release the mouse button. 3.1.5 Input Source Input Source controls the media content displayed on the device 3.1.5.1 Internal Media When internal media is selected, the device plays the content from built-in media player.
To create a new program, click “Add New” button, a “New Program” window will popup Name the program. Default program name will be “Program 1/2/3..”, then select target device from the dropdown list. Target device should be the ezPoster model. Once target device is selected, its resolution will be shown in the Width (xxx) Height(xxx) section. By default, the new program will be applied to 1 ezPoster.
Select the program and right click, a context menu will popup Select Delete to delete the program. Select Edit to Edit a program. Export, the program can be exported to a file and then be imported to an ezPoster through the software import function under program. Export to USB Drive, the program can be exported to a USB Drive then be displayed by plugging in the USB Drive directly onto an ezPoster. 3.1.5.
Channel, Channel selection ranges from 1 to 11. 3.1.6.4.2 WIFI. SSID is the target WIFI router number. Password is the target WIFI router password 3.1.6.4.3 Local Area Network Automatically Obtain IP Address, when ezPoster is connected by ethernet, the IP address can be Automatically obtained. Use Following IP Address: input specific IP address to change the network setting of the ezPoster. 3.1.7 Other 3.1.7.1 Advanced Settings 3.1.7.1.1 Input Resolution.
Click apply when setting is finished. 3.1.7.1.2 Content Offset is used to shift the content displayed on the ezPoster when the content is larger than the ezPoster. The starting point (0,0) is at the left top point. The grey block presents the complete picture, by dragging and moving the grey block, the picture will be shifted on the device.
When click restore to factory default, a window will pop up with options to keep network settings or default wallpaper. By clicking one of the two options. All data will be erased except for the option checked. By clicking OK, the reset will go to next step, a progress bar will popup. When reset is finished, a window will pop up confirming device has been reset to factory default 3.
3.2.2.1.1 Click to enter Program name. All programs uploaded will be shown in the list. 3.2.2.1.1.1 Click “+” to add more program. 3.2.2.1.1.1.1 Program name. Enter a name for the program here. 3.2.2.1.1.1.2 Width. Select how many ezPosters on the width the content is to be displayed with. Select OK to go to the content upload page 3.2.2.1.1.1.3 “ Click +” to select content from Camera or Album From Camera, select content by taking a picture/video with your phone.
Pictures/video added in the same program will be played in sequence. 3.2.2.2 Prioritize HDMI input, by activating this option, the ezPoster will receive HDMI content over other input options. 3.2.3 Brightness, the brightness of the screen. Brightness can be changed by dragging the slider. 3.2.4 Advanced Settings 3.2.4.1 Input Resolution. By default, input resolution is set to be 1920 x 1080. Other options are available when enter the settings. 3.2.4.2 Content offset.
4 Specifications Model SEP640-1.8 Pitch (mm) SEP640-2 1.839 SEP640-2.5 2.0 Display Size (W X H) 2.5 640 x 1920 mm / 25.2 x 75.6 inch Resolution 348 x 1044 320 x 960 256 x 768 Total Pixels 363,312 307,200 196,608 Dimension (W X H X D) Weight 656 x 1936 x 80 mm / 25.8 x 76.2 x 3.15 inch 37.6kg / 82.9lb 36kg / 79lb Power Input 35kg / 77lb AC 100-240V 50/60Hz Max. Power Consumption 650W 600W 560W Avg.
Model SEP640-1.8 SEP640-2 Operating Humidity 10 – 90% RH IP Rating Front IP40 / Rear IP40 Operating Life 100,000 hours Module Size 320 x 160 mm SEP640-2.5 LED Type SMD1515 SMD1515 SMD2020 Module Resolution 174 x 87 160 x 80 128 x 64 Scan Mode 1/29 Dynamic Scan 1/32 Dynamic Scan 1/32 Dynamic Scan Module Count 24 17 EXO Visual Inc www.exovisual.