User's Manual

12
www.lairdtech.com
Laird Technologies
BTM510/511
Bluetooth
®
Multimedia Module
CONFIGURING
THE BTM510/511
The following RFCOMM based UUIDs are dened in the Bluetooth Specication:-
4. ATDL {Remake Connection}
Make a connection with the same device and service as that specied in the most recent ATD
command. An error will be returned if the ‘L’ modier is specied AND a Bluetooth address.
If both ‘L’ and ‘R’ modiers are specied then an error will be returned.
Response: <cr,lf>CONNECT 123456789012 AE<cr,lf>
Or <cr,lf>NO CARRIER<cr,lf>
5.ATDR{MakeConnectiontopeerspeciedinAT+BTR}
Make a SPP connection with the device address specied in the most recent AT+BTR command.
The service is as specied in S Register 101. An error will be returned if the ‘R’ modier is specied
AND a Bluetooth address.
If both ‘R’ and ‘L’ modiers are specied then an error will be returned.
Response: <cr,lf>CONNECT 123456789012 AE<cr,lf>
Or <cr,lf>NO CARRIER<cr,lf>
6. ATEn {Enable/Disable Echo}
This command enables or disables the echo of characters to the screen. A valid parameter value
will be written to S Register 506.
All other values of n will generate an error.
Response: <cr,lf>OK<cr,lf>
Or
Response: <cr,lf>ERROR nn<cr,lf>
7. ATH {Drop Connection}
Drop an existing connection or reject an incoming connection indicated by unsolicited RING messages.
Response: <cr,lf>NO CARRIER<cr,lf>
PROFILE NAME UUID
Serial Port 0x1101
LAN Access Using PPP 0x1102
Dialup Networking 0x1103
IrMC Sync 0x1104
OBEX Object Push 0x1105
OBEX File Transfer 0x1106
IrMC Sync Command 0x1107
Headset 0x1108
Cordless Telephony 0x1109
E0 Disable echo.
E1 Enable echo.
PROFILE NAME UUID
Intercom 0x1110
Fax 0x1111
Audio Gateway (HSP) 0x1112
WAP 0x1113
WAP_CLIENT 0x1114
Advanced Audio
Distribution
0x110D
A/V Remote Control 0x110E
Handsfree 0x111E
Audio Gateway (HFP) 0x111F