User's Manual

ManualsBrandsEzurio ManualsElectronicsBluetooth Multimedia Module

www.lairdtech.com

Laird Technologies

BTM510/511

Bluetooth

Multimedia Module

Response:

<cr><lf>OK<cr><lf> command valid, record added

OR:

<cr><lf>ERROR 05<cr><lf> syntax or value range error

OR:

<cr><lf>ERROR 67<cr><lf> maximum number of subscriber number records reached

AT+HFGS?

This command returns a list of currently available subscriber number records which would

be sent to the HF-unit on request (“AT+CNUM” issued by HF on the SLC).

Response:

For each subscriber number record (if at least one is available):

And nally:

<cr><lf>OK<cr><lf> command nished

With:

<index> = current index of the record, required as parameter n for AT+HFGSD<n>

<number_string> = subscriber number string

<type> = species the format of <number_string>, refer to “AT+HFGS=…” above

<service> = service of this subscriber number:

4 – voice

5 – fax

AT+HFGSD

Delete all subscriber number records in the HFG.

Response:

AT+HFGSD<n>

Delete subscriber number record with index <n> in the HFG. <n> refers to the index that

is displayed on HFGS?. <n> is assumed to be one digit. The index is not xed to a record.

If there are higher numbered indexes than the one deleted, the remaining records will get

a new index assigned dynamically on HFGS?.

Response:

Or:

<cr><lf>ERROR 66<cr><lf> record with requested index <n> not available

Or:

<cr><lf>ERROR 05<cr><lf> syntax error

7.2.12 Audio Gateway (HFP) - Asynchronous Messages

CONNECT <bd_addr

hex

>,<uuid

hex

>[,<dir>]

A Service level connection to headset has been established and initialized.

<bd_addr

hex

> : Bluetooth address of headset device

<uuid

hex

> : “111F” if it is an incoming connection

“111E” if it is an outgoing connection.

<dir> : “<”/”>”/”I”/”O”’ optionally indicates the direction (incoming/outgoing),

please refer to S331 and section 6, page 85

AT COMMAND SET

REFERENCE