User's Manual

BL600-Sx
Single Mode BLE Module
15 BLUETOOTH SIG APPROVALS
15.1 End Product Listings (EPLs)
This section covers the procedure for generating a new EPL (End Product Listing), on the
Bluetooth SIG website. In the instance of a Bluetooth End Product design, a member can create
their own EPL which will have a direct reference to the original Bluetooth End Product QDID.
BL600 Original End Product listing
Design Name Owner QDID number Link to listing on the SIG website
BL600 Module Laird Technologies B020700 BL600 Module listing
The BL600 Module incorporates the following Bluetooth components from Nordic Semiconductor ASA;
Design Name Owner QDID number Link to listing on the SIG website
nRF51XXX_RF Nordic
Semiconductor ASA
B020553 nRF51XXX_RF
nRF51xxx -
S110 link layer
Nordic
Semiconductor ASA
B020269 nRF51xxx - S110 link layer listing
nRF51xxx -
S110 host
Nordic
Semiconductor ASA
B020552 nRF51xxx - S110 host listing
Assumptions
This procedure assumes that the member is using the original Bluetooth End Product design with
no modifications. The original Bluetooth End Product design includes all the mandatory protocol
and profiles layers. You can generate a new EPL (End Product Listing) by using the web
interface on the Bluetooth SIG website. Figure 4 shows the basic concept of how an EPL is
referenced back to a Bluetooth End Product.
Bluetooth End
Product
EPL Listing 1
EPL Listing 2
Figure 4: EPL referenced back to BT end product
35
www.lairdtech.com/wireless Laird