User Manual

16
Ericsson R520m
To make the R520m discoverable
1 From the standby screen, press < or > to enter the menu.
2 Press 5 to enter the Extras menu.
3 Press 4 to select Bluetooth.
4 Press 1 to select Discoverable. The phone will now remain in Bluetooth
discoverable mode for 3 minutes.
5 Now use the Discovering other devices method on your Palm to locate the
phone.
To make the R520m search for other devices
1 From the standby screen, press < or > to enter the menu.
2 Press 5 to enter the Extras menu.
3 Press 4 to select Bluetooth.
4 Press 3 to select Discover. The phone will now perform a search for other
Bluetooth devices in the vicinity. Ensure that your Palm is set to Discoverable
mode.
5 When devices are located, their names will be displayed. Use the Up or Down
button to highlight the required device name and press Yes.
6 Next, press Yes to confirm the prompt Add to paired and you will then be
prompted to enter a Passkey.
7 Type a suitable passkey (the number can be up to 16 characters and must be
entered the same on the other device) and press Yes. Following this your
Palm/blueM should ask for an identical passkey.
8 Enter the same passkey in your Palm and confirm it. The R520m and your
Palm/blueM should now be paired.
Note: If the Discoverable and Discover options in the Bluetooth menu are greyed
out and unselectable, the Bluetooth option may be disabled. Select 4 for Operation
Mode and set the mode to On or Automatic.
Another method for discovering and pairing your Ericsson phone
1 From the standby screen, press < or > to enter the menu.
2 Press 5 to enter the Extras menu.
3 Press 4 to select Bluetooth.
4 Press 2 to select Paired Devices.
5 Select Add Device and choose Phone Accepts.
6 On your Palm/blueM, within the Bluetooth page of Preferences, tap Add
device.
7 Set the Search for option to Phones and tap Search…
8 Select your Ericsson phone from the list of found devices and tap OK.
9 During the connection process you will be asked to type a suitable passkey
on both devices (the number can be up to 16 characters long and must be
typed exactly the same on both devices. Note: for mobile phones, ensure that
the passkey is numerical.
10 Your devices are now Paired, the next step is to select a Service. On your
Palm/blueM, select either Dial-Up Networking (for Internet connections) or
Serial port (if required for other applications) and tap OK.
Your Ericsson phone and Palm/blueM are now paired with a default
service selected.
11 Lastly click Yes from your Ericsson phone to accept the Name Tag.
Note: If the Discoverable and Discover options in the Bluetooth menu are greyed
out and unselectable, the Bluetooth option may be disabled. Select 4 for Operation
Mode and set the mode to On or Automatic.