User Manual
Table Of Contents
- Contents
- Introduction
- Box contents
- Getting Started
- Attaching the blueM
- Removing the blueM
- Installing the blueM software
- Using blueM
- Network (Internet) Settings
- HotSync over Bluetooth
- Bluetooth Profiles
- blueM button
- Menu Items
- Settings
- Troubleshooting and Technical Information
- Regulatory Information and Safety Statements
- Glossary
- Warranty
18
HSCSD
High Speed Circuit Switched Data (HSCSD) is an enhancement of Circuit Switched
Data (CSD) which is available on current GSM networks. It increases the speed of
transmission so you can send and receive information up to three times faster than
the current maxmimum of 9600bps. The HSCSD solution enables higher rates by
using multiple channels, allowing subscribers to enjoy faster Internet access and e-
mail.
Note: Contact your service provider for details on availability, supported connection
rates and to subscribe to this service.
To set up your Palm to make HSCSD connections
1 Tap to locate the icon.
2 Tap the icon.
3 If the Connection is not already showing, tap the in the top right corner
and select Connection from the drop down list.
4 Highlight Bluetooth (Dialup) and click on Edit.
Nokia 6210
Connection Initialisation String
9,600bps at+chsn=1,0,0,0
14,400bps at+chsn=2,0,0,0
19,200bps at+chsn=3,0,0,0
28,800bps at+chsn=4,0,0,0
43,200bps at+chsn=6,0,0,0
6 Enter the Init String (initialisation string) relevent to the mobile phone you
have.
5 Click on Details.
Ericsson R520m & T39m
Connection Initialisation String
9,600bps at+chsn=1,1,0,4
14,400bps at+chsn=2,1,0,12
19,200bps at+chsn=3,2,0,12
28,800bps at+chsn=4,2,0,12