Installation Guide

Operation/Fonctionnement/Operaciones
ENGLISH
Install the EZVIZ International App
Search “EZVIZ” in the App Store or Google Play
TM
to install the EZVIZ
International app.
Launch the app and register.
Search “EZVIZ” in the App Store or Google Play
TM
to install the EZVIZ
International app.
Launch the app and register.
5
Connect Cameras to NVR
Connect one end of the network cable (30m) to the camera’s network connector and
the other end to the NVR’s PoE (Power over Ethernet) network connector.
1
Access the NVR
6
Connect the Network Cable
3
Connect the NVR to the router with the blue network cable via the network port.Connect the NVR to the router with the blue network cable via the network port.
(Recommended) You can access the NVR with the EZVIZ International app. Find
the QR code on the upper surface of the NVR or the start-up wizard on the
display. Log into the EZVIZ International app, scan the QR code, and then follow
the prompts to add the NVR to the EZVIZ account.
You can also access the NVR by operating the local menu. A start-up wizard
will pop up on the screen after the NVR starts, click the Start Wizard button,
and follow the wizard to set the NVR.
(Recommended) You can access the NVR with the EZVIZ International app. Find
the QR code on the upper surface of the NVR or the start-up wizard on the
display. Log into the EZVIZ International app, scan the QR code, and then follow
the prompts to add the NVR to the EZVIZ account.
You can also access the NVR by operating the local menu. A start-up wizard
will pop up on the screen after the NVR starts, click the Start Wizard button,
and follow the wizard to set the NVR.
LAN
USB
Connect the External Display and Mouse
2
Connect the monitor and NVR with the HDMI cable (included) if you want to
operate the system with the local menu. The NVR also supports VGA output (VGA
cable not included).
Connect the mouse to NVR via the USB port.
Connect the monitor and NVR with the HDMI cable (included) if you want to
operate the system with the local menu. The NVR also supports VGA output (VGA
cable not included).
Connect the mouse to NVR via the USB port.
ESPAÑOL
Conexión de las cámaras al NVR
Conecte un extremo del cable de red (30 m) al conector de red de la
cámara y el otro extremo al conector de red PoE (alimentación a través de
Ethernet) del NVR.
1
The figures in this manual are for reference only and may differ from the
actual product.
Las figuras de este manual solo se incluyen a modo de referencia y pueden
no ser idénticas al producto en cuestión.
1
2
1
2
Start Up the NVR
4
Connect the NVR to the power socket with the power adapter.
Turn on the power switch on the rear panel to start the DVR.
LAN
USB
The camera(s) is/are already receiving power from the PoE ports. It may take a
few moments for the camera(s) to boot up and for the image(s) to appear on the
display.
1
2
1
2
LAN
USB
1
2
POWER
WAN LAN2 LAN4LAN1 LAN3
WPS/
RESET
LAN
USB
LAN
USB
UD.6L0208B0028A01