User's Manual

6
2. Installation Location
• Choose a location with a clear, unblocked eld of view and with a good wireless
signal.
• Make sure the wall is strong enough to withstand three times the weight of the
camera.
• Camera cannot be installed with the lens facing direct sunlight.
3. Installation Procedure
1. Remove the protective lm from the lens.
2. Stick the drilling template onto a clean and at surface.
3. (For cement wall only) Drill screw holes according to the template, and insert
anchors.
4. Use screws to x the camera on the installation surface.
Drilling Template
Adjusting Screw
Camera
Anchor Screw
5. Loosen the adjusting screw.
6. Rotate the upper part of the camera to get an appropriate detection angle.
7. Tighten the adjusting screw again.
Adjusting Screw
0~90°
0~360°