User's Manual

2
Lens
IR Light
LED Indicator
Name Description
RESET Button • When the camera is working, press and hold for about 4s until the
LED indicator is solid red, the camera will restart and all parameters
will be restored to default settings.
• If you want to connect the camera to a new Wi-Fi, press and hold for
about 4s, and then follow the instructions on the app to configure a
new Wi-Fi.
MIC Collects and converts sound into an electrical signal.
Speaker Converts an electrical audio signal into a corresponding sound.
Fastener Rotate to make angle adjusting easier.
IR Light Helps the camera to get black-and-white images at night.
LED Indicator • Solid Red: Camera starting up.
• Slow-flashing Red: Network exception.
• Fast-flashing Red: Camera exception (e.g. Micro SD card error).
• Fast-flashing Blue: Camera ready for Wi-Fi connection.
• Slow-flashing Blue: Camera running properly.
• Solid Blue: App visiting camera.
Cable and Network Connection
1. Wiring
Option A: Wired Connection
1. Connect the camera to the LAN port of your router with the Ethernet cable
(purchase separately).
2. Connect power port of the camea to the power outlet.
Power Adapter
Outlet
Router
Use power adapter and power cable come with the camera in the box.