Quick Start Guide
8
Add Fingerprint/Password/Card
Add Fingerprint
1
After entering the menu, press 11# to add
ngerprint.
2
Touch ngerprint reader. Then touch again after
voice prompt and repeat the operation for 5 times
to conrm. The ngerprint number will ash on
the keypad when complete.
• The number of times will be displayed on the keypad each time you touch the ngerprint reader.
• Please keep in mind the ngerprint number, which is required if you want to delete the ngerprint.
• Fingerprint which has been added cannot be added again.
Fingerprint Collection
When collecting ngerprint, please adjust your nger to maximize the ngerprint contact surface as shown
below, which helps to improve ngerprint verication success rate.
Add Password
1
After entering the menu, press 12# to add
password.
2
Enter password (6 to 10 digits) and press #. Then
enter password and press # again to conrm.
The password number will ash on the keypad
when complete.
• Please keep in mind the password number, which is required if you want to delete the password.
• Password which has been added cannot be added again.