User's Manual

14
2. Note: install correct batteries in case of explosion.
• When not using batteries for a long time, remove them from battery seat.
• Do not use new batteries with old ones at the same time.
• Do not place battery with the (+) and (-) in the wrong way around.
• Dispose used batteries according to the local environmental protection law.
Alarms
1. Tamper Alarm
Once being dismantled by force, the lock will send out alarm lasting about one minute.
2. System Locked Alarm
Verify with wrong ngerprint, password or card 5 times in a row, the system will be locked for 3 minutes.
3. Low Voltage Alarm
Once battery voltage is low, the voice prompt will remind you to replace batteries.
Restore to Factory Settings
1. Remove the battery cover of rear panel and take out batteries.
2. Press reset button for 5 seconds with needle-resemble object, meanwhile put back batteries in the battery
seat.
3. Release reset button and press "#" to conrm after voice prompts.
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To nd out if an update
is available, go to the app store and search for "EZVIZ".
Add Lock to EZVIZ
The app interface may be different due to version update, and the interface of the app you installed on
your phone shall prevail.
Please add lock and gateway to EZVIZ by following steps:
Select Appropriate Location for Gateway
• The gateway needs to be plugged in.
• To ensure that the connection between the gateway and sub devices is stable, please place the gateway
at the center of the sub devices, and the distance between the gateway and the router should be ≤6
meters.
• There should be no metal obstacles and walls between the gateway and sub devices, and the gateway
and the router.
• Do not place any gateway or detector on the top of the router.