User's Manual
Table Of Contents
15
Connect Gateway to Power Source
Plug the gateway in. When start up the gateway for the rst time, the LED indicator ring turns from solid
orange to fast-ashing white, which means that the gateway has entered network conguring mode.
Power Adapter
Outlet
Connect Gateway to Network
• Wired network is recommended. You need to connect the gateway to the LAN port of the router with
power cable (purchase separately) as displayed in the gure below.
Router
• You can also use wireless network. Scan the QR code at the bottom of the gateway with the EZVIZ app,
and then connect the gateway to Wi-Fi by following the on-screen instructions.
If Wi-Fi connection failed, or you want to connect the gateway to another Wi-Fi, you need to make the
gateway oine rst. Press and hold the function key for over 4 seconds until you hear the voice prompt,
and then connect the gateway to Wi-Fi by following the on-screen instructions.
Add Gateway to EZVIZ
1. Log in to your account through EZVIZ app, tap the device adding icon and then the QR code scanning
interface will be displayed.
2. Scan the QR code at the bottom of the gateway.