Installation Manual

ManualsBrandsEZVIZ ManualsCamera & PhotoSmart Home Camera

Regulatory Information

EC DECLARATION OF CONFORMITY

Hereby, Hangzhou EZVIZ Software Co., Ltd. declares that the radio equipment type [CS-C1C, CS-C1HC, CS-C1T, CS-C2C,

CS-CV206, CS-CV310, CS-C3N, CS-C3W, CS-C3WN, CS-C3X, CS-C6N, CS-CV246, CS-CV248, CS-C6CN, CS-C6C, CS-C6W,

CS-TY1, CS-TY2, CS-TY3, CS-CV336, CS-DP1, CS-DP1C, CS-DP2C, CS-DB2C, CS-C4W, CS-C4C, CS-CV228, CS-C5W, CS-C5C,

CS-C5HC, CS-C5X, CS-C5HX, CS-C8W, CS-C8C, CS-C3A, CS-BC1, CS-W2H, CS-X5S-4W, CS-X5S-8W, CS-A1-32W, CS-T9-A,

CS-T4-A] is in compliance with Directive 2014/53/EU.

The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:

http://www.ezvizlife.com/declaration-of-conformity.

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore

with the applicable harmonized European standards listed under the Radio Equipment Directive

2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper recycling, return this product to your local supplier upon

the purchase of equivalent new equipment, or dispose of it at designated collection points. For more

information see: www.recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation

for specific battery information. The battery is marked with this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier

or to a designated collection point. For more information see: www.recyclethis.info

Use only power supplies listed in the Table.

Equipment model

Adapter manufacture Adapter model

CS-C1C/ CS-C1HC/ CS-C1T/ CS-C2C/

CS-CV206/ CS-CV246/ CS-C6N/

CS-C6CN/ CS-C6C/ CS-TY1/ CS-TY2/

CS-TY3/ CS-W2D/ CS-A1-32W/

CS-T9-A

Shenzhen Honor Electronic Co Ltd ADS-5RE-06 05050EPCU/EPC(US),

ADS-5RH-06 05050EPB(UK),

ADS-5RH-06 05050EPG(EU),

ADS-5RH-06 05050EPSA(AU),

ADS-5RH-06 05050EPBR(BR),

ADS-5RH-06 05050EPI(IN),

ADS-5MA-06A 05050GPK(KR)

CS-CV248/ CS-C6W/ CS-C6Wi/

CS-CV336/ CS-DP1/ CS-DP1C/

CS-DP2C/ CS-C3A/ CS-BC1

Shenzhen Honor Electronic Co Ltd ADS-10LA-06 05010EPCU/EPC(US),

ADS-10RH-06 05010EPB (UK),

ADS-10RH-06 05010EPG(EU),

ADS-10RH-06 05010EPSA(SA),

ADS-10RH-06 05010EPBR(BR),

ADS-10RH-06 05010EPI(IN),

ADS-12CG-06 05010EPC(JP)

CS-CV310/ CS-C3N/ CS-C3W/

CS-C3WN/ CS-C3X/ CS-SD1/

CS-C4W/ CS-C4C/ CS-CV228/

CS-C8W/ CS-C8C/ CS-W2H/

CS-W3C-WD1200G/ CS-T8-B

Shenzhen Honor Electronic Co Ltd ADS-12FG-12N 12012EPCU(US),

ADS-12FG-12N 12012EPB(UK),

ADS-12FG-12N 12012EPG(EU),

ADS-12FB-12 12012EPSA(AU),

ADS-12FG-12N 12012EPBR(BR),

ADS-12FG-12N 12012EPI(IN)

Moso Power Supply Technology Co. Ltd MSA-C1500IC12.0-18P-GB(UK),

MSA-C1500IC12.0-18P-DE,

MSA-C1500IC12.0-18P-AU(AU),

MSA-C1500IC12.0-18P-BR(BR),

ADS-25FSG-12 12018GPI(IN)

CS-X5S-4W/ CS-X5S-8W

Important Safety Information

Note: Please read the manual before using the device.

Caution: Do not block ventilation openings while the system is on, and keep at least 2 cm distance from

ventilation openings and walls or other things which may block the openings.

Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery that

can result in an explosion.

Warning: Leaving a battery in an extremely high temperature surrounding environment that can result in an

explosion or the leakage of flammable liquid or gas.

Warning: A battery subjected to extremely low air pressure that may result in an explosion or the leakage

of flammable liquid or gas.

Warning: Dispose of used batteries according to the instructions.

Warning: Replace only with the same or equivalent type recommended by the manufacturer.

Caution: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY.

Warning: Do not ingest battery, Chemical Burn Hazard.

Caution: This product contains a coin/button cell battery. If the coin / button cell battery is swallowed, it

can cause severe internal burns in just 2 hours and can lead to death.

Caution: Keep new and used batteries away from children.

Caution: If the battery compartment does not close securely, stop using the product and keep it away from

children.

Caution: If you think batteries might have been swallowed or placed inside any part of the body, seek

immediate medical attention.

Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Caution: This symbol on the device indicates that the safety compatibility manual and / or installation

manual must be read, which contains information related to the safe operation of the device. Be sure to

read these instructions before operating the equipment.

Warning: The separate earthing terminal must be permanently connected to earth.

Warning: For SELV DC input: the DC power source shall comply with the Safety Extra-Low Voltage (SELV)

requirements of IEC 60950-1.

Summary of content (9 pages)

PAGE 1
Regulatory Information This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
PAGE 2
FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 3
Package Contents Camera (x1) Screw Kit (x1) Base (x1) Drill Template (x1) Power Adapter (x1) Power Cable (x1) Quick Start Guide (x1) The camera appearance is subject to the actual model you have purchased.
PAGE 4
Basics Micro SD Card Slot Reset Button LED Indicator MIC Name LED Indicator Description Solid Red: Camera is starting up. Slow-flashing Red: Wi-Fi connection has failed. Fast-flashing Red: Device exception (e.g. MicroSD card error). Solid Blue: Video is being viewed or played back in EZVIZ App. Slow-flashing Blue: Camera is running properly. Fast-flashing Blue: Camera is ready for the Wi-Fi connection. Micro SD Card (sold separately) Initialize the card in the EZVIZ app before using it.
PAGE 5
Speaker Ethernet Port Power Port Setup 1 Power-on Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in the figure below. Power Outlet Power Cable The LED turning fast-flashing blue indicates that the camera is powered on and ready for Wi-Fi configuration.
PAGE 6
2 Camera Setup 1. Create a user account --Connect your mobile phone to Wi-Fi using your 2.4GHz network. --Search for "EZVIZ" in the App Store or Google Play(TM). --Download and install the EZVIZ app. --Launch the app. --Create and register an EZVIZ user account by following the start-up wizard. The camera works with 2.4GHz Wi-Fi signals. If you have a dual-band router with separate 2.4GHz and 5GHz networks, make sure your phone is connected to the 2.4GHz one. 2.
PAGE 7
Installation (Optional) 1 Install the Micro SD Card (Optional) 1. Rotate the sphere upwards until you see the card slot. 2. Insert the Micro SD card (sold separately) into the card slot as shown in the figure below. 1 2 This Side Up After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it. 3. In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status. 4.
PAGE 8
2 Install the Base The camera can be placed horizontally or mounted on the ceiling. Here we take ceiling mounting as an example. • Make sure the ceiling is strong enough to withstand three times the weight of the camera. • Avoid positioning the camera in an area that gets a lot of light shining directly into the camera lens. --Place the drill template onto the surface you have chosen to mount the camera. --(For cement wall/ceiling only) Drill screw holes according to the template, and insert three anchors.
PAGE 9
3 Install the Camera Mount the camera to the base, and turn it clockwise until it is fixed. 1 2 After installing the camera, please go to the EZVIZ app to flip the camera image. For detailed information, please visit www.ezvizlife.com.