Quick Start Guide Scan the QR code with the EZVIZ App to add the device to your account. Please keep it for further reference. www.ezvizlife.
COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ.
user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Overview EN 1. Package Contents Doorbell (x1) Mounting Plate (x1) Chime (x1) Foam Sticker (x1) Screwdriver (x1) Screw Kit (x1) Inclined Mounting Plate (x2) Drill Template (x1) Wire Connector (x3) U-shaped Wire (x2) Power Adapter (x1) Power Cable (x1) Plate Foam (x1) Pin (x1) Quick Start Guide (x1) The appearance of chime and power adapter is subject to the actual one you have bought. Tools You May Need Drill (x1) It is recommended to use a drill with diameter of 6mm.
2. Basics Doorbell PIR Terminals Lens Power Port Power Button Light Sensor (Do Not Block) LED Indicator/ Doorbell Button Dismantle Hole Name Description LED Indicator • Solid Red: Less than 20% battery left. • Slow-Flashing Red: Charging. • Solid Blue: Person detected or doorbell pressed/fully charged/more than 20% battery left. Power Button • Short press for 1 second: Turn on the doorbell. • Long press for 5 seconds: Turn off the doorbell.
EN 2. Plug the chime into a power outlet (within 4 meters from the doorbell). When the LED indicator is fast-flashing blue, it is ready for Wi-Fi connection. Power Outlet LED Indicator 2. Add to EZVIZ App 1. Create a user account. ----- Connect your mobile phone to Wi-Fi (suggested). Search for "EZVIZ" in the App Store or Google PlayTM. Download and install the EZVIZ app. Launch the app and register an EZVIZ user account. 2. Add chime to EZVIZ. -- Log in the EZVIZ app.
If the network connection of doorbell fails, please adjust the position of the chime. It is recommended to put the chime and doorbell within 4 meters. Installation 1. Doorbell Installation • Recommended installation height: 1.2m-1.5m. 1.76m 1.2m 1m 2m • The following situations are not recommended for installation. Otherwise the network connection may be affected: 1. Iron doors; 2. Corners of load-bearing walls.
Note: Always be careful when handling electricity wiring. If you’re not comfortable to do it yourself, do consult a qualified electrician. EN Step 3: Select the mounting plate. Install directly by the mounting plate, or use one of the inclined mounting plates as a supplementary mounting bracket if you wish to see more on a specific side. Door Doorbell Without Inclined Mounting Plate 15° Door Doorbell With Inclined Mounting Plate Step 3: Install the mounting plate.
--Fix the mounting plate to the wall. (Please fix the upper two screws first.) Step 4: Install the doorbell. --(Optional) For users who have previously installed a doorbell, connect the existing doorbell wires to the terminals at the back of the EZVIZ doorbell, then tighten the terminal screws. Wire Connector U-shaped Wire --Install the doorbell to the mounting plate.
Step 4: Restore power at the breaker. EN 2. Micro SD Card Installation (Optional) --Insert the micro SD card (sold separately) into the card slot as shown in the figure below. --In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status. --If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal and it can store videos.
• When charging, the doorbell will automatically turn on. • Please make sure to shut off the electricity at the breaker before removing the doorbell if it's wire connected. EXPOSURE TO RADIOFREQUENCY RF(for EU Market) The frequency bands and the nominal limits of transmitted power (radiated and/or conducted) applicable to this radio device are the following: Band Wi-Fi 2.4 GHz Frequency From 2.412 GHz to 2.472 GHz Power transmission (EIRP) 100 mW For detailed information, please visit www.ezvizlife.
LIMITED WARRANTY Thank you for purchasing Hangzhou EZVIZ Software Co., Ltd. (“EZVIZ”) products. This limited warranty (“warranty”) gives you, the original purchaser of the EZVIZ product, specific legal rights. You may also have other legal rights that vary by state, province or jurisdiction. This warranty applies only to the original purchaser of the product. “Original purchaser” means any consumer having purchased the EZVIZ product from an authorized seller.
