User Manual

DIGITAL VIDEO CAMERA

User's Manual

SKU# 200-HD

Long Range High Resolution IR Camera

8 Mega Bright IR's & 22 Large IR's

ZOOM

FOCUS

• Suggested mounting height 8'-12'

• Do not mount camera directly to a metal surface

• Do not point camera directly into light sources

Attention items:

• Do not touch CCD or lens

• Do not use any unidentified power supply

• Avoid installation in unstable places

WARNING

Attention:

To reduce the danger of electric shock, please do not open the case (or back

cover) of camera; everything needed for user operation is on the surface of

the camera; please seek help from a qualified professional for repair.

Image Sensor 1/3" SONY SUPER HAD CCD

Signal system PAL/NTSC

Horizontal resolution 480TVL

Minimum illumination 0Lux(IR LED ON)

S/N ratio >52dB

Gamma 0.45

Lens 8-40mm 1/2" IR Lens

Video output 1.0Vp-p, 75

Ω

IR wave length 850nm

Power supply DV 12V±10%

Power consumption less than 3.0W

IR distance 60-80m

PAGE 1
DIGITAL VIDEO CAMERA User's Manual SKU# 200-HD Long Range High Resolution IR Camera 8 Mega Bright IR's & 22 Large IR's ZOOM FOCUS • Suggested mounting height 8'-12' • Do not mount camera directly to a metal surface • Do not point camera directly into light sources WARNING Attention: To reduce the danger of electric shock, please do not open the case (or back cover) of camera; everything needed for user operation is on the surface of the camera; please seek help from a qualified professional for repair.
PAGE 2
• Do not use camera in the following conditions, Temperature: -20⁰C/+50⁰C IR distance Making a BNC Connection Connecting a Pre-made Cable Step 1: Strip away all of the cable and shielding so you have 1/2" of the center conductor exposed as shown in the picture. Connect this end to the camera. Step 2: Then strip away the black outer jacket so you have 1/4" of the shielding exposed. Do not allow any of the copper shielding to touch the center conductor.
PAGE 3
Step 2: Now take the red power cable lead and twist it together with the black & white lead from the power pigtail. Now take the black lead from the power cable and twist it together with the all black lead from the pigtail. Use the gray wire nuts provided with your system and twist them onto the wires until they are firmly secured. Mail Main Office/Mailing Address Automated Video Systems 1600 S.