User guide

ManualsBrandsEZWatch ManualsAccessories for videoEZ-CLOCKDVR

Covert Clock Radio Digital Video Recorder

Quick Start Guide

To Record Constant Video :

1) Plug the camera in to power, and turn the recorder on using the ‘VR On/Off’ button on the

top of the Clock Radio.

2) Ensure that a SD memory card has been inserted into the back of the Radio.

3) On the Infrared Remote Control, press the red ‘REC’ button. The camera should begin

recording immediately. Clips are recorded onto the SD memory card for playback.

To Record Video on Motion Detection mode :

1) Plug the camera in to power, and turn the recorder on using the ‘VR On/Off’ button on the

top of the Clock Radio.

2) Ensure that a SD memory card has been inserted into the back of the Radio.

3) Plug the camera in to a TV, Monitor, or other device using the RCA video inputs on the

camera cable. Switch your TV/Monitor to the video input you’ve plugged it into. You should

now see the camera image on the screen.

4) Open the camera menu by pressing the menu button on the Infrared Remote. Go down to

the ‘schedule’ menu and press enter to open it up.

5) Using the up/down and left/right buttons, set every hour to the icon depicting a running

man. This sets the camera to record when it sees motion all day long.

6) To adjust the motion detection sensitivity and the area of the screen to record motion, see

the record setup

To play back recorded video :

1) Plug the camera in to power, and turn the recorder on using the ‘VR On/Off’ button on the

top of the Clock Radio.

2) Ensure that a SD memory card has been inserted into the back of the Radio.

Summary of content (9 pages)

PAGE 1
Covert Clock Radio Digital Video Recorder Quick Start Guide To Record Constant Video : 1) Plug the camera in to power, and turn the recorder on using the ‘VR On/Off’ button on the top of the Clock Radio. 2) Ensure that a SD memory card has been inserted into the back of the Radio. 3) On the Infrared Remote Control, press the red ‘REC’ button. The camera should begin recording immediately. Clips are recorded onto the SD memory card for playback.
PAGE 2
3) Plug the camera in to a TV, Monitor, or other device using the RCA video inputs on the camera cable. Switch your TV/Monitor to the video input you’ve plugged it into. You should now see the camera image on the screen. 4) Press the Play/Pause button on the remote control to begin playing back the most recently recorded clip. 5) When you are finished playing back clips, press the stop button to return to the live video image.
PAGE 3
EZ-CLOCKDVR – Covert Clock Radio Digital Video Recorder Manual Product Description The EZ-CLOCKDVR is a covert hidden video recording system mounted within a fully functional Clock Radio. This revolutionary system allows for discreet monitoring anywhere, any time. Being shaped as a clock radio it never looks out of place, no matter the application. The unit records to an SD Memory card inserted into the back of the recorder.
PAGE 4
The circle on the left will have a rotating red section ONLY when the camera is currently recording. To the right, you will see an icon displaying the type of recording the camera is set up to perform.
PAGE 5
SET DATE/TIME : This sub-menu allows you to set the date and time of the camera. The date and time is always visible on the live image as well as on the playback. You can adjust the date, time, and format by using the left/right buttons on the remote. When you have set the date and time, press the ‘Return/Stop’ button on the remote control to return to the main menu. MOTION DETECT : This feature allows you to configure the ability of the camera to record only when motion is seen.
PAGE 6
MANUAL RECORD : This sub-menu allows you to specify the quality of recordings when you are recording manually. To record manually, press the ‘Record’ button on the remote while looking at the live camera image. You can change the following options : Video Size : This is the resolution of the image. Higher resolution has more detail but makes your recordings larger. Bigger recordings use more SD card space than smaller recordings, meaning you record less time overall.
PAGE 7
SD CARD OPTIONS : The options here allow you to configure how the camera records, what to do when the card is full, and allows you to clear the card of all recordings. Max File Size: This allows you to set how big to make each file. You do not normally need to change this unless directed to by a technical support representative. Card Full : This option tells the camera what to do when the card fills up to maximum capacity. ‘Stop’ tells the camera to stop recording until the card is manually cleared.
PAGE 8
Playback There are three ways to play back video clips within the system. The first is to connect the camera to a TV using the yellow/white RCA plugs, and to hit the ‘Play/Pause’ button on the remote. The camera will immediately begin playing back the most recently recorded clip. When a clip finishes, it will move to the next most-recently recorded clip, one at a time.
PAGE 9
Troubleshooting Problem Resolution Unit is not Outputting any Video • • • Unit Has no Power • • Image is Distorted • • • Ensure the TV is on the correct Video Input Ensure the Camera is turned on and the power LED light is showing green. Ensure the Power Supply is connected, If the unit is running on battery power then the battery may have been drained. Ensure the power supply is snugly connected to the power connection on the cable The Power Supply may have a damaged fuse or connection.