Instruction Manual

GeoVision Technical Handbook
54
4.4.3 Multi Host
Through Multi Host, user may customize each channel to pull up video from different DVRs directly.
1. Follow steps 1 to 3 in section 4.4.2.
2. Select “Multiple Host” instead of Single Host above.
3. For each camera, click on “Edit”.
4. Enter IP Address, User Name, Password, as well as Ports used for DVR.
5. Select Camera No. on the DVR to be played for this channel.
6. Click “OK” to save camera information for this channel.
7. Repeat steps 1 to 6 to define Camera information for each channel.
8. Click on “Save”.
9. Click on “OK”.
 For detailed instruction, refer to p.400 of v8.4 User Manual