Owner manual

DIGITAL VIDEO CAMERA

User's Manual

SKU# PIN380C

Flush UFO Style Pinhole Hidden Camera

• Suggested mounting height 8'-12'

• Do not mount camera directly to a metal surface

• Do not point camera directly into light sources

Attention items:

• Do not touch CCD or lens

• Do not use any unidentified power supply

• Avoid installation in unstable places

Temperature: -20⁰C/+50⁰C

WARNING

Attention:

To reduce the danger of electric shock, please do not open the case (or back

cover) of camera; everything needed for user operation is on the surface of

the camera; please seek help from a qualified professional for repair.

Image Sensor 1/3" Color SONY CCD

Effective Pixels PAL:512(H)x582(V) NTSC:512(H)x492(V)

Sensor area 4.9mmx3.7mm

Signal system PAL/NTSC

Horizontal resolution 380TVL

Minimum illumination 2.0Lux

Electronic shutter Auto:1/50(1/60)-1/100,000Sec

S/N ratio >48dB

Gamma 0.45

Lens Pinhole 3.6mm

Video output 1.0Vp-p, 75

Ω

Power supply DV 12V±10%

Power consumption 100mA (+/-10%)

• Do not use camera in the following conditions,

PAGE 1
DIGITAL VIDEO CAMERA User's Manual SKU# PIN380C Flush UFO Style Pinhole Hidden Camera • Suggested mounting height 8'-12' • Do not mount camera directly to a metal surface • Do not point camera directly into light sources WARNING Attention: To reduce the danger of electric shock, please do not open the case (or back cover) of camera; everything needed for user operation is on the surface of the camera; please seek help from a qualified professional for repair.
PAGE 2
Making a BNC Connection Connecting a Pre-made Cable Step 1: Strip away all of the cable and shielding so you have 1/2" of the center conductor exposed as shown in the picture. Connect this end to the camera. Step 2: Then strip away the black outer jacket so you have 1/4" of the shielding exposed. Do not allow any of the copper shielding to touch the center conductor. The cables are labeled with a yellow wrap detailing the camera end and the DVR end.