User's Manual

E 52RCT E ng. Manual v.1.10 (H/W v.1.0) Page 64
6.2 Sound Setting
You can use the sound settings features to customize various settings
6.2.1 Alert Type
The following types are available.
n Ringing : the phone rings the ringing tone selected via the [Ringing
Tone] option (4.2.2.).
n Vibrating : the phone vibrates without ring.
n Lamp : the phone lights indicator LED only.
n Ring & Vib. : the phone vibrates and rings simultaneously.
n Ring after Vib. : the phone rings after vibrates
6.2.2 Ringing Tone
This option allows you to select the required ringing tone. You can choose
between 30 different tones of bell and melody. And you can also choose
between the tones you had downloaded. Each time you select a tone, it is
played for a few seconds.
6.2.3 Message Alarm
You can set alert type and choose different alert tones for incoming message,
outgoing message and voice message. If you want or not an alert while you are
making a call, it is possible to set message alert on or off.
There are option menus as following;
n Setting Alert
u Ringing : the phone rings the ringing tone selected via the
[Ringing Tone] option (4.2.2.).
u Vibrating : the phone vibrates without ring.
u Ring & Vib. : the phone vibrates and rings simultaneously.
u OFF : the phone lights indicator LED only.
n Setting Alert Tone
u Incoming Message : choose among 5 tones
u Outgoing Message : choose among 5 tones
u Voice Message : choose among 5 tones
n Alert during Call
u On
u Off