User's Manual

E 52RCT E ng. Manual v.1.10 (H/W v.1.0) Page 68
When the Privacy feature is enabled, user must enter the
password each time press touch any keys. And before entering the
password, not available to make a call and or operate the phone.
But the answering a call, receiving message and power on/off are
available without entering the password.
n Phone Lock
When the Phone Lock feature is enabled, user must enter the password
each time the phone is switched on. And before entering the password,
not available to make a call and or operate the phone.
n SIM Lock
When the SIM Lock feature is enabled, the phone only works with the
current SIM. If the phone is switched on with uncertified SIM, the phone
shall ask the password. Once the correct password has entered, the
phone shall work with uncertified SIM.
6.5.3 FDN Mode
When the FDN Mode feature is enabled, the person using this phone can call
only the phone numbers stating with the numbers stored in FDN. To makes a
call to the number not starting the numbers stored in FDN, you must enter the
PIN2 to disable FDN mode. If the SIM card does not have PIN2, this feature is
not supported.
In the FDN Mode, you can use several useful functions as following.
6.6 Reset
You can reset your phone. There are 2 types of reset as following.
6.6.1 Factory Reset
You can easily reset your phone to its default configuration by [Factory Reset]
menu. In this case, the downloaded objects and phonebook records are not
deleted and remained.
6.6.2 All Data
If you want to delete all kind of data in your phone without change of setting,
select [All Data] menu.
Note : When you select [Reset] menu, remember you cannot recover the lost data.
If you cannot sure, DON’ T RESET your phone!!