User's Manual

E 52RCT E ng. Manual v.1.10 (H/W v.1.0) Page 76
n Is your phone switched on (Power on/off key pressed for more than two seconds)?
n Are you accessing the right cellular network?
You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
n Have you switched off the microphone?
n Are you holding the phone close enough to your month? The microphone is located at
the bottom of the phone.
The phone starts beeping and “Low Battery” flashes in the
display
The battery is insufficiently charged. Replace the battery and recharge it.
The audio quality of the call is poor
n Check the signal strength indicator in the display ( ); the number of bars after it
indicates the signal strength from strong ( ) to weak ( ).
n Try moving the phone slightly or moving closer to a window if you are in a building.
No number is dialed when you recall a phonebook entry
n Check that the numbers have been stored correctly, by using the Phonebook Search
feature.
n Re-store the number, if necessary.