User's Manual

Page 119
2) Camera Settings
(1) White Balance (Auto/Daylight/Tungsten/Fluorescent)
(2) Flash Light (On/Off): You can set the camera flash
light on or off with this setting. When the Flash is on,
the camera flash will lit on when you take a picture.
(3) Shutter Sound (Sound1/2/3/Off)
Allows you to select a shutter sound among three
kinds of shutter sounds or turn off the shutter sound.
The sound makes you feel the sense of taking a
picture.
(4) EV (-4/-3/-2/-1/0/+1/+2/+3/+4): You can set the EV
(Exposure Value) and the preview will look darker in
lower EV and brighter in higher EV.
(5) Night mode (On/Off)
(6) Banding (60Hz/50Hz): You can select the sampling
bandwidth of the camera sensor. When bandwidth
increases, the memory size and the picture quality will
increase.
3) Image Setting
You can set image size and quality of your photo as
following.