User's Manual

MP500 User’s Manual v.0.12 Page 33
Answering a Call
When you answer a call, the phone rings or vibrates
according to the Sound & Light settings with the incoming call
animation.
When the caller is identified, the phone will display the
caller’s phone number and name, if stored in the phonebook.
If the caller cannot be identified, only the caller’s phone
number will be displayed.
1. Press the Dial key. If the Any key Answer option is set
to ON, you can press any key to answer a call except
for the power on/off key. If the Any Key Answer option
is set to off, you need to press the Send key to answer
a call.
2. To reject an incoming call, press the [Reject] soft key.
3. End the call by pressing the End key.
Emergency Call
Ensure that the phone is switched on and in service.
Enter the emergency number (Official Emergency Number or
second official emergency number) and press the Dial key.
provide your location. Do not end the call until given
permission to do so. End the call by pressing the End key.
Note :
When “Enter Lock Code” or “Enter PIN” messages are
prompted on the display during power-on, some network
may not allow emergency call. However, some network
may request to insert a SIM card and enter Official
Emergency Number.