User's Manual

phone.
1. Put the device nearest possible when you search a new device.
2. Check to turn on your phone and the new device. For turning on
your new device, see instruction provided by the device
manufacturer. Make sure your phone is in Bluetooth Mode.
3. Select “Search Audio Device” to find the new device.
4. After your phone finds the device, press [Pair] soft key (left), it might
ask for a pass code. Default pass code is depending on the
Bluetooth device. You might try 0000 as a pass code. Usually the
Bluetooth audio device provides a guide with this pass code.
5. The phone and device will be paired and connected. If you fail this
pair procedure, try again or contact the device manufacturer, or
change to other device.
Note: Please use recommended Bluetooth devices for optimal use.
My Device
This will display Paired Device(s), which have been connected and
registered with your phone. You can conveniently connect to the
frequently using Bluetooth device by using this menu.
Option:
1) Connect: you can connect to the listed Bluetooth device.
2) Rename: you can edit the device name.
3) Delete: you can delete the saved device from the My Device list.
4) Search new device: you can also search for new device.
Active Device
Settings
• Visibility
You can set your phone visible to other Bluetooth devices. If you set
this On, other devices can search your phone as a Bluetooth device.
You can only change this option when the Bluetooth Mode is On.
• My Phone Name
Name your phone name by using this option. When other Bluetooth
device searches your phone, this name will be displayed.
• Authentication
Set Authentication On or Off. You can only change this option when
the Bluetooth Mode is On.
• Audio Path
(1)Leave in Phone
(2)Forward to BT Headset
• FTP Setting
Set shared folders of File manager when you send data by Bluetooth.
About
This menu will display your Bluetooth’s profile. (A2DP, AVRCP_T,
HFP, HSP, SPP, DUN, FTP and OPP)
4.7 Restore Factory Settings
This feature would reset the phone to the same settings as those
configured at the factory. In this case, it does not delete the downloaded
objects and phonebook records.
You will need to input password to restore factory settings. The initial
password is 0000.
5. Multimedia (Menu 5)
The Multimedia menu provides you with several multimedia functions.
5.1 Camera
You can use the camera module embedded in your phone to take
photos. Before taking a picture, you can set your camera settings on
screen by pressing navigation keys, alphanumeric keys, and [Option]
soft key (left).
Note:
• Do not take photos of people without their permission.
• Do not take photos in a place where cameras are not allowed.
• Do not take photos in a place where you may interfere with another
person’s privacy.
When you take a photo in direct sunlight or in bright conditions,
shadows may a
ppear on the photo.
Taking and Saving a Photo
1. Choose [Camera] menu and switch the display to capture mode.
2. Set your camera by using [Option] or alphanumeric keys.
3. After setting the view and take a picture by pressing the [OK] key