Fab Glass Frameless Oval Mirror Installation Manual FAB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Office Timing: 8:30 - 18:00 EST Fax: (614)-334-4919 info@fabglassandmirror.
Thank you for your purchase! It is our desire to make your entire experience from purchase to installation as easy as possible. We ask that you read each step of this installation manual thoroughly to ensure proper installation of your new Mirror. Our installation techniques are very important. Installing your Mirror in any manner other than the steps outlined in this manual may lead to structural failure of your Mirror.
Horizontal Side By using your cutting tool, carefully open the package and remove the mirror vertical or horizontal angle. 1 Vertical Side How to Measure Horizontal Side If you want to install horizontal angle then all calculations and measurments on horizontal side clip. On the back side of the mirror, use your pencil to mark the center point.
5 Hold the mirror against the wall where you want to install it, and mark the wall at the top edge of the mirror with your pencil. 6 Using the results from the Steps 3 and 4, measure down from the top edge mark to the center point between the clips and place another mark, then from that mark measure out to the center of the clip body on each side and mark the wall in both spots. 7 Drill two holes in the wall at the clip body center locations determined in Step 6.
Now install the screw in the anchor with your drill. 9 Zoom View Space from wall Wall (Side View) Leave ¼ “ of space between the wall and the screw head. 10 Zoom View Distance From Wall Mirror back Side 11 12 Now Fix the clip holes on screws Page 3 Attach the double-sided sticker pads on the bottom of the mirror. Hang the mirror on the wall by inserting the screw heads into the clips, and press gently against the bottom of the mirror to attach the sticky pads firmly to the wall.
13 Congratulations! You have successfully installed your frameless Oval Mirror.