Safety data sheet

ManualsBrandsFABCONSTRUCT Manuals3D Printing33180

Safety Data Sheet

according to Regulation (EC) No. 1907/2006

FabConstruct 3D SCANNING SPRAY (Mattierungsspray)

1Page v. 11

1. Identication of the substance/mixture and of the company/undertaking

1.1. Product identier

FabConstruct 3D SCANNING SPRAY (Mattierungsspray)

Further trade names

Article no. (user): 33180

1.2. Relevant identied uses of the substance or mixture and uses advised against

Use of the substance/mixture

Testing and measurement technology

1.3. Details of the supplier of the safety data sheet

Fabistron GmbH

Juetrichauer Straße 3

39261 Zerbst / Anhalt

Germany

Telephone: +49 3923 610070

Telefax: +49 3923 610080

e-mail: info@fabistron.de

Internet: www.fabistron.de

Emergency telephone

number: +49-151-53820401 (09:00-18:00)

2: Hazards identication

2.1. Classication of the substance or mixture

Regulation (EC) No. 1272/2008

Hazard categories:

Aerosole: Aerosol 1

Serious eye damage/eye irritation: Eye Irrit. 2

Specic target organ toxicity - single exposure: STOT SE 3

Hazard Statements:

Extremely ammable aerosol.

Pressurised container: May burst if heated.

Causes serious eye irritation.

May cause drowsiness or dizziness.

2.2. Label elements

Regulation (EC) No. 1272/2008

Hazard components for labelling

propan-2-ol; isopropyl alcohol; isopropanol

Signal word: Danger

Piktograms:

Revision date: 02.06.2017

Summary of content (11 pages)

PAGE 1
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) 1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier FabConstruct 3D SCANNING SPRAY (Mattierungsspray) Further trade names Article no. (user): 33180 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture Testing and measurement technology 1.3.
PAGE 2
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) Hazard statements H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. Precautionary statements P102 Keep out of reach of children. P210 Keep away from heat. No Smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use.
PAGE 3
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) After contact with skin Wash with plenty of water. Change contaminated clothing. After contact with eyes If product gets into the eye, keep eyelid open and rinse immediately with large quantities of water, for at least 5 minutes. Subsequently consult an ophthalmologist. After ingestion Rinse mouth immediately and drink plenty of water. Medical treatment necessary. 4.2.
PAGE 4
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) 7. Handling and storage 7.1. Precautions for safe handling Advice on safe handling If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Advice on protection against fire and explosion Keep away from sources of ignition - No smoking. Take precautionary measures against static discharges.
PAGE 5
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) Hand protection The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Recommended protective gloves brand: (Break through time > 480 min) NBR (Nitrile rubber). (0,35 mm) Butyl rubber. (0,5 mm) FKM (fluororubber).
PAGE 6
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) Decomposition temperature: not determined Oxidizing properties Not oxidising. Vapour pressure: Density (at 20°C): not determined 0,925 g/cm³ Water solubility: slightly soluble Solubility in other solvents: not determined Partition coefficient: Vapour density: Evaporation rate: not determined not determined not determined 9.2. Other information Solid content: ca.
PAGE 7
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) CAS No.
PAGE 8
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) 12.3. Bioaccumulative potential The product has not been tested. Partition coefficient n-octanol/water CAS No. Chemical name Log Pow 106-97-8 butane 2,89 74-98-6 propane 2,36 75-28-5 isobutane 2,8 12.4. Mobility in soil The product has not been tested. 12.5. Results of PBT and vPvB assessment not applicable 12.6. Other adverse effects No information available.
PAGE 9
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) Classification code: Special Provisions: Limited quantity: Transport category: Tunnel restriction code: 5F 190 327 344 625 1L 2 D Other applicable information (land transport) EQ: E0 14.2. Inland waterways transport (ADN) UN number: UN proper shipping name: Transport hazard class(es): Hazard label: UN 1950 AEROSOLS 2 2.
PAGE 10
Safety Data Sheet according to Regulation (EC) No. 1907/2006 FabConstruct 3D SCANNING SPRAY (Mattierungsspray) Special Provisions: Limited quantity Passenger: IATA-packing instructions-Passenger: IATA-max. quantity-Passenger: IATA-packing instructions-Cargo: IATA-max. quantity-Cargo: A145 A167 A802 30 kg G 203 75 kg 203 150kg Other applicable information (air transport)v Passenger-LQ: Y203 EQ: E0 14.5. Environmental hazards ENVIRONMENTALLY HAZARDOUS: no 14.6.
PAGE 11
Safety Data Sheet according to Regulation (EC) No.