Spec Sheet

CFMRED - 6” to 5” reducer

Model #

Compatible with all Faber hoods over 300 cfm

(Scirocco 8” require additional duct transition from 3 1/4” x 10” to 6” round for CFM reducer to be installed)

CFM Reducer Kit

Reduces Range hood CFM levels below 300 cfm for make up air solutions

In today’s tightly insulated homes or in high rise condo-

miniums with ventilation restrictions, sometimes hoods

under 300 cfm’s are required by local building codes to

prevent removing too much air from inside the home.

The CFM reducer kit from Faber allows almost the entire

collection of hoods to be converted to below 300 cfm.

This means even more designer hoods with higher cfm’s

are available in the Faber line, without the need to install

make-up air systems. Homeowners with air restrictions

are now only limited by their imaginations in choosing

the right hood for their kitchen!

5 1/8”

height

0

100

200

300

400

500

600

700

800

0 50 100 150 200 250 300 350 400 450 500 550 600

Pressure(Pascals)

CFM

CFMLevelsWithandWithoutReducer

With Reducer

Without Reducer

PAGE 1
CFM Reducer Kit Reduces Range hood CFM levels below 300 cfm for make up air solutions In today’s tightly insulated homes or in high rise condominiums with ventilation restrictions, sometimes hoods under 300 cfm’s are required by local building codes to prevent removing too much air from inside the home. The CFM reducer kit from Faber allows almost the entire 5 1/8” height collection of hoods to be converted to below 300 cfm.
PAGE 2
INSTALLATION INSTRUCTIONS Install Damper, spacer, and reducer on top of the 6” duct exit. Tape all parts together and connect 5” round ductwork Reducer Spacer Damper Completed 960_02 - 100721 436004960_02 - 100721 p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.