Spec Sheet

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.
Dimensional Diagrams
(see installation instructions for more information)
MUDAMPER6 = 6”
MUDAMPER10 = 10”
MUDAMPER6 = 6”
MUDAMPER10 = 10”
AIR FLOW SWITCH ASSEMBLY
(Located inside Range Hood Ducting)
AUTOMATIC MAKEUP AIR DAMPER
(Located inside Fresh Air Ducting)
Note: The fresh air damper is installed into a completely separate duct independent of the range hood ducting. The ductwork and make-
up air damper are linked into your return air side of the central HVAC system OR a separate duct coming from the outside directly into
the kitchen. The air flow switch and damper are linked thru low voltage wiring. The plug-in 24 volt transformer is required when installing
the fresh air duct and damper directly thru the kitchen wall. Connecting to the Central HVAC system does not require the transformer. A
qualified HVAC professional should inspect your home to determine the best installation.
MUDAMPER8 = 8”
MUDAMPER8 = 8”
FEATURES & ADVANTAGES
• Meets IRC (international residential code) M1503.4
• 24 Vac, 60 hz ac motor on damper
• Fresh air damper opens automatically when hood is operating, closes shut when fan is turned off
• Switch assembly attaches directly above the hood inside ducting
• Can be installed in all ducting configurations (vertical, horizontal, down or after elbows)
• Switch assembly fits inside all faber chimneys, compatible with all models over 300 cfm
• Simple installation: no drilling, calibrations or measuring required
• Designed and engineered to witstand heavy cooking contaminants (grease, steam, smoke and steam)
• Can be combined with most other hvac components and is a universal makeup air solution
• Reliable mechanical air switch prevents service issues and false tripping of system
p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com
Rev. 08/14