Data Sheet

© 2022 · Klaus Faber AG · all rights reserved KLAUS FABER AG · Europaallee 33 · 66113 Saarbrücken · Germany · T +49 681 9711 - 0 dbl_nym.pdf / Issue 02/17/2022 / page 1/3
Sheathed building wire
NYM-J/-O
Application: For installation in, on or under plaster, in dry, damp or wet rooms as well as in walls and concrete (except for sha-
ken, jolted, tamped concrete). Also suitable for installation outdoors if protected from sunlight.
Construction and technical data:
CPR-classication according to EN 50575: Eca
Standard: VDE 0250-204
Conductor material: copper, bare
Conductor construction: class 1, up from 16 sqmm class 2
Insulation: PVC TI1
Sheathing material: PVC YM1
Colour of outer sheath: grey RAL 7035
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Max. temperature at conductor, °C: 70 °C
Permitted outer cable temperature, xed, °C: -40 - +70 °C
Permitted outer cable temperature, moved, °C: 5 - 70 °C
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of
shipment. Outer diameters are approximately.
NYM-J
Nominal voltage Uo: 300 V
Nominal voltage U: 500 V
Test voltage: 2 kV
Protective conductor: yes
Core identication: colours acc. to VDE 0293 (HD 308);
more than 5 cores: gn-ye + numbers
part
no.
part name Dl
[mm]
Rl
[Ohm/km]
Wi
[mm]
Ibl
[A]
Wm
[mm]
Rbv
[mm]
Ø
[mm]
Cu G
[kg]
020003 01X2.5 RE 1.9 7.41 0.7 1.4 23.2 5.8 24 70
020004 01X4 RE 2.4 4.61 0.8 1.4 25.6 6.4 38 80
020005 01X6 RE 2.9 3.08 0.8 1.4 27.2 6.8 58 105

Summary of content (3 pages)