Data Sheet

ManualsBrandsFABER KABEL ManualsIndustrial Data CablesElectrical wiring (N)YM(St)-J 3 x 1.50 mm² Grey Sold per metre

Screened building wire

(N)YM(St)-J

Application: This installation cable is statically shielded for limiting the electromagnetic elds of current-carrying conductors in

sensitive environments such as IT, hospitals, but also for installation in homes where a particular sensitivity to electromagnetic

elds is provided. For installation on, over, in and under plaster in dry, humid and wet rooms as well as in masonry and concrete

(except for shaken, jolted, tamped concrete). Also for use outdoors if protected from direct sunlight.

Construction and technical data:

CPR-classication according to EN 50575: Eca

Conductor material: copper, bare

Conductor construction: class 1, up from 16 sqmm class 2

Insulation: PVC TI1

Screen: Foil

Drain wire: yes

Sheathing material: PVC YM1

Colour of outer sheath: grey RAL 7035

Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2

Max. temperature at conductor, °C: 70 °C

Permitted outer cable temperature, xed, °C: 70 °C

Permitted outer cable temperature, moved, °C: 5 - 70 °C

The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of

shipment. Outer diameters are approximately.

(N)YM(St)-J

Nominal voltage Uo: 300 V

Nominal voltage U: 500 V

Test voltage: 2 kV

Protective conductor: yes

Core identication: colours acc. to VDE 0293 (HD308)

part

no.

part name Dl

[mm]

[Ohm/km]

Ibl

[A]

Rbv

[mm]

Cu G

[kg]

020308 3X1.5 RE 1.5 12.1 15 45 9 51 154

Summary of content (2 pages)

PAGE 1
Screened building wire (N)YM(St)-J Application: This installation cable is statically shielded for limiting the electromagnetic fields of current-carrying conductors in sensitive environments such as IT, hospitals, but also for installation in homes where a particular sensitivity to electromagnetic fields is provided. For installation on, over, in and under plaster in dry, humid and wet rooms as well as in masonry and concrete (except for shaken, jolted, tamped concrete).
PAGE 2
part no. part name Dl [mm] Rl [Ohm/km] Ibl [A] Rbv [mm] Ø [mm] Cu G [kg] 020309 4X1.5 RE 1.5 12.1 14 55 11 65 184 020310 020311 5X1.5 RE 1.5 12.1 14 57.5 11.5 80 208 7X1.5 RE 1.5 12.1 14 60 11.9 108 248 020312 3X2.5 RE 1.9 7.41 18 55 11 80 203 020313 4X2.5 RE 1.9 7.41 18 57.5 11.5 104 256 020314 5X2.5 RE 1.9 7.41 18 60 12 128 284 020315 3X4 RE 2.4 4.61 24 57.5 11.5 123 290 020316 5X4 RE 2.4 4.61 24 67.5 13.