Data Sheet

dbl_sihf.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Silicone insulated cord SiHF
Conductor material: tinned copper
Conductor class: class 5 = fine stranded
Insulation: silicone rubber
Sheathing material: silicone rubber
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Halogen-free: DIN EN 50267/IEC 60754
UV-resistant: no
Oil-resistant: yes
Maximum permitted
conductor temperature:
180 °C
Permitted outer cable
temperature, fixed:
-60 - +180 °C
Bending radius, fixed
installation:
5 x DA
Bending radius, moving
application:
15 x DA
SiHF-J SiHF-O
Nominal voltage Uo: 300 V 300 V
Nominal voltage U: 500 V 500 V
Test voltage: 2 kV 2 kV
Protective conductor: yes no
Core identification: colours acc. to VDE 0293 (HD 308);
more than 5 cores: gn-ye + numbers
Application: For connection of mobile electrical appliances without mechanical stress at increased ambient
temperatures, for example in steelworks, but also at low temperatures. Insulation and sheath are resistant to most oils,
greases, acids, lyes and oxidants. For fixed installation in mechanically protected conduits. For indoor and outdoor use.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics SiHF-J
p/n part name R
l.
[Ω/km]
I
bl.
[A]
D
A.
[mm]
Cu
.
[kg/km]
G
.
[kg/km]
035233 SiHF-J 03X0,5 RT 40,1 9 5,9 14,4 42
035234 SiHF-J 04X0,5 RT 40,1 9 6,6 19,2 54
035235 SiHF-J 05X0,5 RT 40,1 9 7,3 24 62
035236 SiHF-J 07X0,5 RT 40,1 9 8,1 34 82
035237 SiHF-J 10X0,5 RT 40,1 9 10,4 48,1 124
035238 SiHF-J 12X0,5 RT 40,1 9 10,8 57,6 141
035239 SiHF-J 16X0,5 RT 40,1 9 12,3 76,8 186
035240 SiHF-J 18X0,5 RT 40,1 9 12,9 86,5 211