Data Sheet

dbl_h1z2z2-k.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Solar cable FABER® SOLAR
H1Z2Z2-K acc. to VDE 0283-618
CPR-performance: Eca
Conductor material: tinned copper
Conductor class: class 5 = fine stranded
Insulation: cross-linked polyolefin-copolymer
Sheathing material: cross-linked polyolefin-copolymer
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Smoke density: DIN EN 61034/IEC 61034
Halogen-free: DIN EN 50267/IEC 60754
UV-resistant: yes
Ozone-resistant: yes
Maximum permitted
conductor temperature:
120 °C
Permitted outer cable
temperature, fixed:
-40 - +90 °C
Permitted outer cable
temperature, in motion/
during installation:
-25 - +60 °C
Bending radius, fixed
installation:
4 x DA
Bending radius, moving
application:
6 x DA
Nominal voltage Uo: 1 kV
Nominal voltage U: 1 kV
Nominal voltage (DC): 1,5 kV
Test voltage: 6,5 kV
Application: Solar line for freely movable use or fixed installation in photovoltaic systems as per EN 60364-7-712.
The cable may be used indoors, outdoors, in explosive areas, in industrial or agricultural operations and is approved
for direct laying in the ground. The cable is regarded as short-circuit-proof and earth leakage-proof. It meets the VDE
application regulation VDE-AR-E 2283-4. The cable has been subjected to the following additional tests: - abrasion as
per EN 50289-3-7 - water AD 7 as per HD 516. Please note the applicable installation instructions on our website.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics H1Z2Z2-K
p/n part name D
l.
[mm]
R
l.
[Ω/km]
I
bl.
[A]
D
A.
[mm]
F
zv.
[N]
Cu
.
[kg/km]
G
.
[kg/km]
041027 H1Z2Z2-K 01X4 black 3 5,09 55 5,4 60 38,4 56
041028 H1Z2Z2-K 01X4 blue 3 5,09 55 5,4 60 38,4 56
041029 H1Z2Z2-K 01X4 red 3 5,09 55 5,4 60 38,4 56