Spec Sheet/ Dimensions

Rev. 11/14
Dimensional Diagrams 24”
WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.
(see installation instructions for more information)
Custom Front Panel Dimensions
23 9/16”
13/16”
1 15/32”
Product
Dimensions
EN
7
7
DIMENSIONS and MAIN PARTS
Components
Ref. Q.ty Product Components
1 1 Hood Body, complete with: Controls, Light, Blower, Fil-
ters
8 1 Directional Air Outlet grille
10 1 Damper
20 1 Closing element
Ref. Q.ty Installation Components
12a 4 Screws 3/16” x 1” 3/4
12e 2 Screws 1/8” x 6/16”
Q.ty Documentation
1 Instruction Manual






EN
8
8
INSTALLATION
Drilling the Support surface and Fitting the Hood
SCREW FITTING
•• The hood support surface must be 8” 11/16 above the bottom
surface of the wall units.
•• Drill the support with a ø 3/16”drill bit, using the drilling tem-
plate provided.
•• Cut a hole ø 6”in size on the support surface, using the drilling
template provided.
•• Fix using the 4 screws 12a provided.
SNAP-ON FITTING
•• The hood can be installed either directly on the bottom surface
of the wall units using snap-on side supports.
•• Cut a fitted opening in the bottom surface of the wall unit, as
shown.
•• Insert the hood until the side supports snap into place.
•• Lock in position by tightening the screws Vf from underneath
the hood.
CLOSING ELEMENT
•• The space between the edge of the hood and the rear wall can
be closed by applying the element 20 provided, using the
screws supplied for this purpose.
10 3/8”
Cut Out
24”
24”
Feature Chart
Size / CFM
24” / 300 CFM
Cabinet Cut Out 19 3/4” (W) x 10 3/8” (D)
Convertible to Recirculating Yes - charcoal kit required (#FILTER1)
Controls 3 Speed Slider
Lighting 2 X 20 (W) Halogen
Ducting Top 6” Round
Ducting Direct Rear Vent N/A
Grease Filters (front and rear) Yes - (2) dishwasher safe mesh filters
Auto On / Off Yes - fan / lights on w/ pull out
Integrate front panel Yes - Use your own custom front
Stainless Steel Front Panel Yes
Make Up Air Compliant Yes - 300 cfm
Built In Mounting Hardware Yes - EasySnap Mounting Clips
AC Input / AC Power (120 V - 60 hz ) / (Max 190 W at 1.8 A)
Green Energy Saver Mode Yes
Annual Electricty Costs $2.35 / Year *
# CRIS24SS