CORDLESS VACUUM CORDLESS VACUUM FVC X-CYCLONE 151 VOLTAGE : 220-240V FREQUENCY : 50/60Hz INSTRUCTIONS MANUAL PLEASE READ THIS INSTRUCTIONS MANUAL CAREFULLY BEFORE USING THIS PRODUCT
CONTENT 1. IMPORTANT SAFETY INSTRUCTIONS 2. PRODUCT PARAMETER 3. PRODUCT PARTS LIST 4. OVERVIEW 5.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution should always READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) 1. The Vacuum Cleaner is an electric appliance. It must be used in accordance with the operating conditions of the instructions. This instructions should be kept properly for future reference. 2. Check and confirm that the vacuum cleaner voltage must be consistent with the supply voltage. 3.
PARAMETER ITEM CORDLESS VACUUM MODEL FVC X-CYCLONE 151 INPUT 100-240V POWER 180W OUTPUT 27VDC, 500mA BATTERY 2400mAh PRODUCT PARTS LIST 7 1. 2-IN-1 BRUSH 2. FILTER 4. ELECTRIC FLOOR BRUSH 5. WALL BRACKET 6. POWER ADAPTOR 7. MAIN MOTOR 3.
OVERVIEW
GENERAL USAGE AND SAFETY GUIDELINES ASSEMBLING - Attach different accessories for different tasks as illustrated. - Install vacuum cleaner in the right direction to avoid airflow issues or not working. USING Before use, make sure - the power supply is sufficient - the duct collector & filter are cleaned, dried and fixed in place. Press the power button Press suction strength button to switch suction level Turn hand vacuum 180° as shown for better reach under furniture.
GENERAL USAGE AND SAFETY GUIDELINES Adjust the metal tube for different uses. Insert the 2 in 1 brush to clean sofa or curtain. CLEANING & MAINTAINING - Please make sure the dust collector is aligned. - Do not tilt the filter while is in operation. 1. DUST CUP CLEANING Press the dust collector release button to empty.
GENERAL USAGE AND SAFETY GUIDELINES 2. FILTER CLEANING Take over the filter and metal filter dust cup. Indeed, clean with water and a mild detergent. Air dry the cutton filter and metal filter until completely dry before placing back in the vacuum cleaner. Put the filters to dust collector after cleaning. Rotate dust collector and align “ ” with “ ”, then fix it in place. 3.
GENERAL USAGE AND SAFETY GUIDELINES WALL MOUNTING Measure the distance between the bracket holes first. Drill 2 holes as measured width, secure the back plate using the appropriate fixings Align the vacuum cleaner at the raised point of the bracket and hang it. The package contains adhensive pads that can be used ti install the bracket, but it is recommended to use screws to fix it more firmly. CHARGING 1.
GENERAL USAGE AND SAFETY GUIDELINES TROUBLESHOOTING If it still doesn’t work with the following solution, please contact service center Problem Solution Make sure cleaner is fully powered. Vacuum cleaner doesn't work Push charger securely into electrical outlet, try another outlet or check circuit breaker. Product suction is blocked, clean up the suction inlet. Make sure charger is securely inserted into electrical outlet.
GENERAL USAGE AND SAFETY GUIDELINES CIRCUIT DIAGRAM SERVICE OF DOUBLE-INSULATED APPLIANCES A double-insulated appliance is marked with one or more of the following : The words “ DOUBLE INSULATION ” or “ DOUBLE INSULATED ” or the double insulation symbol. In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance.
Dibuat untuk dan diedarkan oleh : FIMACO SDN BHD 8-2, WISMA FIAMMA, No.20, Jalan 7A/62A, Bandar Manjalara, 52200 Kuala Lumpur, Malaysia.
