Specification Sheet

INCA SMART GRAY
INSERT RANGE HOOD
CUT OUT
# FILTER4 –
Charcoal Filter Kit
High quality charcoal filter for use
when recirculating the air back
into the kitchen. Filters out odor
and should be replaced every
6 months. Some ductwork is
required to exhaust the unit out of
the cabinet.
# LINE30ST / LINE36ST –
Stainless Steel Liner 30 &
36" Create a perfectly sealed,
non-combustible 4" tall perimeter
to "line" the wood below the Inca
Smart. Depth adjustable from 16" -
17 7/8". SEE PAGE 3 FOR MORE
INFO, USE WITH 28GR240
# LINE24ST –
Stainless Steel Liner
24" Create a perfectly sealed,
non-combustible 4" tall perimeter
to "line" the wood below the Inca
Smart. Depth adjustable from 16" -
17 7/8". SEE PAGE 3 FOR MORE
INFO, USE WITH 21GR240
INSM28GR240
INSM21GR240
SPECIFICATIONS DIMENSIONS
ACCESSORIES
Rev :11/19
2 Cabot Road Hudson, MA 01749 • TEL: [phone] • E-Mail: [e-mail] www.faberonline.com
Made in Italy
WARNING! Product specifications are subject to
change without notification. Consult the installation
instructions before you begin installing this range
hood. * Check local make up air codes for
guidelines.
PERFORMANCE
SPEED 1 2 3
CFM 85 160 240
Sones 0.8 1.8 3.5
cut out dimensions 21" 19 9/16" w x 10 1/4" d
cut out dimensions 28" 26 5/8" w x 10 1/4" d
body width | depth 20 9/16" (21") 27 9/16" (28") w X 11 1/4" d
height inside cabinet 7 1/16"
convertible to ductless yes - FILTER4
controls 3 speed slider
lighting 2 X 4 (w) LED - 1 Level
ducting top 5" round
grease filters dishwasher safe mesh
built in mounting hardware yes - easy snap mounting clips
power cord included yes