Spec Sheet/ Dimensions

WARNING! You must know the cook top cutout to determine the
downdraft cutout. Consult the cook top manufacturer’s installation
instructions before cutting the counter top.
Dimensional Diagrams
Rev. 07/12
WARNING! Product specications are subject to change without notication. Consult the installation instructions for
both the remote blower and the ventilation system before you begin installing this rangehood.
Cutout Dimensions
Top trim widths:
30" (762 mm) vent
36" (914 mm) vent
14 " (357 mm)
retractable
vent height
27" (686 mm) for 30" (762 mm) vent
33" (838 mm) for 36" (914 mm) vent
13" (330 mm)
10 "
(254 mm)
21⁄8 " (54 mm)
283⁄4"
(730 mm)
3⁄8 " (9.5 mm)
11⁄2 " (38 mm)
13" (330 mm)
Terminal box cover
6" (152 mm)
diameter
vent collar
x
22
30”
36”
30
36
Note: Overall dimensions show unit with
internal blower box attached. Remote
Blower would only have a vent collar
attached instead of the 13” x 13” box shown.
X = Distance to the rear of the cabinet
or wall. Must be a minimum of ½”.
When mounted on the front of the hood, the
Internal blower box can be rotated to vent
left, right, down or thru the hood to the rear
of the unit. When mounted on the back of the
hood, the blower can be vented left, right or
down. The remote blower venting can come
out the front or back of the unit venting
down.
Product Side View
(motor on the front and back)
Behind a Cooktop Behind a Cook top,
Range top or Range
FRONT
BACK
Remote Blower ducting cut out hole