Instructions / Assembly

20
CRICKET FIELD FORMED
FLANGE CAP
2" MIN.
VERTICAL
UNIT
WIDTH
OVERALL HEIGHT TO BE
MIDWAY PLUS ON HEAD
JAMB
VERTICAL
FLANGE
2" MIN.
FLANGE CAP
2" MIN.
2" MIN
2" MIN
BEND
2" MIN.
RIDGE
UNIT
HEIGHT
FLAT
STOCK
Notes:
1. Trim both ends of the uphill and downhill sides of the
skylight flashing as indicated.
2. Slide the uphill flashing into the slots cut into the roofing
and apply a liberal amount of sealant.
3. Assemble the skylight as indicated on pages 20-21.
4. Trim and assemble chimney flashing similarly.
PROCEDURE FOR THE INSTALLATION OF SKYLIGHT FLASHING
Notes:
1. Whenever possible, position the skylight curb so the ribs
of the roof panels do not interfere with the flashing.
2. Cut the roofing panels as close to the left, right and
downhill sides of the curb as possible. Cut the uphill
side within 1” of the valley formed by the cricket.
3. The skylight flashings should be 4” wider than the width
of the curb (2” on each side).
4. Install with 1 x 1 sealer and sealant per Detail B-B on
page 21.
C
C
CRICKET FIELD
FORMED
B
A A
B