Instructions / Assembly

3
Shelterguard®
INSTALLATION GUIDELINES
Caution: Shelterguard® roofing panels must be applied on a minimum roof pitch of 2½:12 or greater.
Important Notice: This guide must by read in its entirety before beginning installation.
This guide is supplied by FABRAL, Inc. for use by its customers, and is intended to be a guide only. This does not replace local or
state building codes.
FABRAL, Inc. assumes no responsibility for any problems, which might arise as a result of improper installation or any personal
injury or property damage that might occur with the products use.
Contact: Fabral Engineering at 800-477-2741 with questions regarding information provided in this manual.
Under certain conditions, panels may show waviness commonly referred to as “oil canning.” This is a characteristic of
roll forming. Such oil canning will not be accepted as cause for rejection.
In areas of high snow or ice accumulations, snow guards, or snow blocks, may need to be added to the metal roof system
to reduce or eliminate snow or ice from cascading from a higher roof and damaging lower roofs, roof valleys, gutters, or
objects on the ground. Check with your installer and local building codes as to the need of snow blocks or guards in your
area and design appropriately.