User Manual

ManualsBrandsFactory Direct Hardware ManualsFor HomeBrizo 6516729-BN

12697.00 11.05

Models/Modelos/Modèles

6216709, 6516729

Series/Serie/Seria

TrevitCross

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

For easy installation of your

BRIZOt faucet you will need:

* To READ ALL the instructions completely before

beginning.

* To READ ALL warnings, care, and maintenance

information.

Para instalación fácil de su llave

BRIZOt usted necesitará:

* LEER TODAS las instrucciones completamente

antes de empezar.

* LEER TODOS los avisos, cuidados, e información

de mantenimiento.

TWO HANDLE WALL--MOUNTED LAVATORY

AND KITCHEN FAUCETS

LLAVES DE AGUA DE DOS MANIJAS PARA

INSTALACIÓN EN LA PARED DE BAÑOS Y COCINAS

MÉLANGEURS MURAUX POUR ÉVIERS ET LAVABOS

6216709

6516729

Pour installer votre mélangeur BRIZOt

facilement, vous devez :

* LIRE TOUTES les instructions avant de débuter.

* LIRE TOUS les avertissements ainsi que toutes les

instructions de nettoyage et d’entretien.

CSA B125

ASME A112.18.1

ICC/ANSI A117.1

Summary of content (7 pages)

PAGE 1
TWO HANDLE WALL--MOUNTED LAVATORY AND KITCHEN FAUCETS LLAVES DE AGUA DE DOS MANIJAS PARA INSTALACIÓN EN LA PARED DE BAÑOS Y COCINAS MÉLANGEURS MURAUX POUR ÉVIERS ET LAVABOS t r r CSA B125 ASME A112.18.1 ICC/ANSI A117.1 Models/Modelos/Modèles 6216709, 6516729 Series/Serie/Seria TrevitCross 6216709 6516729 You may need/Usted puede necesitar/ Articles dont vous pouvez avoir besoin: S I L I C O N E Write purchased model number here. Escriba aquí el número del modelo comprado.
PAGE 2
1 2 FAUCET INSTALLATION MAKE CONNECTIONS TO WATER LINES Construct a suitable stud brace for mounting of the valve body. Refer to the roughing--in dimensions located on the plaster guard sleeves on valve body. Note: Indicated min. / max. roughing--in dimensions are to finished wall. If tile or another surface is to be added after installation, this must be considered. A suggested framing example is shown above. Your installation may have different framing requirements than those shown.
PAGE 3
4 COMPLETE WALL FINISH MOUNTING WALL ESCUTCHEONS Complete finish wall with 1½” diameter holes for handle and spout shanks. Space hole centers 4” (100 mm) apart. Note: To ensure proper fit, do not oversize holes, beyond 1 ¾”. Complete wall finish. Pull off plaster guards and discard them. Carefully slide the escutcheons over each sleeve of the valve body. Option: If mounting surface is uneven, apply suitable sealant to the back surface of each escutcheon, according to manufacturer’s instructions.
PAGE 4
5 6 2 1 5 2 2 3 4 1 MOUNTING HANDLES AND SPOUT FLUSH YOUR SYSTEM Handles: With hot / cold valves in closed position. Attach the handle caps (1) to the valve stem. Remove the handle plug (2) from the handle. I.e. by using a knife blade to lift the plug a little. Be careful not to damage the surface. Line up handle (4), slide handle onto the valve stem. Refit and tighten the screw (3). Refit handle plug (2) by pushing it into the handle.
PAGE 5
7 8 2 1 5 2 3 4 MAINTENANCE SHUT OFF WATER SUPPLIES BEFORE SERVICING VALVE ASSEMBLY If faucet leaks out of spout or under handle -- replace valve cartridge. (1). Remove handle end cap (2). Unscrew the handle lock screw (3).Pull off handle (4) and handle cap (5). Remove escutcheon, if necessary. Unscrew handle base, 17 mm Hex. Unscrew and replace valve cartridge, 19 mm Hex. Assemble in reverse order. Line up handles, with valves in closed position, before refitting handles.
PAGE 6
1. RP36262s Aerator Aireador Aérateur 6216709 2. RP40110s Spout with aerator (9”) Caño con aireador (9”) Bec avec aérateur (9”) 3. RP40111s Spout with aerator (6”) Caño con aireador (6”) Bec avec aérateur (6”) 4. RP44186s Handle w/plug and screw, complete Manija completa con tapón y tornillo. Manette complète avec bouchon et vis 5. RP40112s Handle sleeve base & Stem Base y espiga de la manga para la manija Embase de manette gainée et tige 2 6.
PAGE 7
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. LIFETIME FAUCET AND FINISH LIMITED WARRANTY All parts and finishes of the BRIZOt faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.