Instruction Manual

1 2
3 4
5 6
7 8
9 0
(LHD) LOCKED
(LHD) UNLOCKED
TURNPIECE
(RHD) LOCKED
(RHD) UNLOCKED
TURNPIECE
6
d.Seeexampleforturnpiece
positionforrighthanddoor(RHD)
andlefthanddoor(LHD)when
boltisfullythrown(locked)and
fullyretracted(unlocked).
8.Continued.......
a. Presstheprogrambutton on the interior unit once.
b. Enter in 4 to 8 digit codeontothekeypad.
c.Pressthe“LOCK”buttontosavecode.
d. Extendtheboltbypressingthe“LOCK”buttonandre-enterthecodeto
test.Theboltshouldretracttotheunlockedposition.Ifitdoesnotunlock,
repeatsteps(a)through(c).
a. Presstheprogrambutton on the interior unit twice.
b. Enter in 4 to 8 digit codeontothekeypad.
c.Pressthe“LOCK”buttontosavecode.
d. Extendtheboltbypressingthe“LOCK”buttonandre-enterthecodeto
test.Theboltshouldretracttotheunlockedposition.Ifitdoesnotunlock,
repeatsteps(a)through(c).
9.ProgrammingaUserCode.
● A programmed code can be from four (4) to eight (8) digits long.
●Up to 2 user codes can be entered.
●Excess delay in the programming steps once started will cause unit to
beep twice and will require you to restart from step (a).
Programmingthe1stusercode.
Programmingthe2ndusercode.
Program
Button
LOCK
Button