Data Sheet

DATA SHEET | SENTIMATE
See also the document “SENTIMATE board - Getting started and FW examples Rev5_ENG.pdf” for more details on Am-
biMate registers and commands for reading and writing it.
4.2. MGM13P 2.4GHz wireless module
The MGM13P is Silicon Labs’ first PCB module solution for 802.15.4 Mesh and multiprotocol networking that supports
Bluetooth 5.0 LE, including long range, high throughput, and regular BLE PHYs.
Based on the Silicon Labs EFR32MG13 Mighty Gecko SoC, the MGM13P delivers robust RF performance, low energy
consumption, a wide selection of MCU peripherals, regulatory test certificates for various regions and countries, and a
simplified development experience, all in a small form factor. Together with the certified software stacks and powerful
tools also offered by Silicon Labs, the MGM13P can minimize the engineering efforts and development costs associated
with adding Zigbee, Thread, Bluetooth 5.0 LE, or multi-protocol connectivity to any product, accelerating its time-to-
market.
The MGM13P is intended for a broad range of applications, including:
• IoT multi-protocol end-node devices and gateways
• Connected home
• Lighting
• Metering
• Building automation and security
• Health and wellness
Key features:
• Zigbee, Thread, BLE, or multi-protocol connectivity
• Antenna or U.FL variants
• Up to +19 dBm TX power
• -94.6 dBm BLE RX sensitivity at 1 Mbps
• -102.1 dBm 802.15.4 RX sensitivity
• 32-bit ARM® Cortex®-M4 core at 38.4 MHz
• 512/64 kB of flash/RAM memory
• Robust security features
• Wide selection of MCU peripherals
• Integrated DC-DC converter
• 25 GPIO pins
• 12.9 mm × 17.8 mm × 2.3 mm