Data Sheet

DATA SHEET | SENTIMATE
The two ideal diodes are independently enabled and prioritized using inputs EN1 and EN2. The output current limits can
be adjusted independently from 0.5A to 4A using resistors on the CLIM pins. Furthermore, the ideal diode currents can
be monitored via CLIM pin voltages.
Open-drain status pins indicate when the ideal diodes are forward conducting. When the die temperature approaches
thermal shutdown, or if the output load exceeds the current limit threshold, the corresponding warning pins are pulled
low.
Implementation of the LT3106 on SENTIMATE board
NU means Not Used and then the component is not present in the board. In