Operation Manual

Clean the accessible
filter whenever the
drainage pump is
blocked by foreign
bodies.
a Loosen the base
by gently pulling
on the sides and
turning down-
wards. Then undo
the fasteners.
If there is no side
access, introduce
a small screwdriver
in the three slots
on the upper part
of the base, in
order to lever it
and loosen the
hooks.
b Use a plate or
other container
under the filter to
collect the water
that will be relea-
sed when it is loo-
sened.
c Turn the filter a
quarter- or half-
way sideways
towards the left.
Water will start to
come out.
d When you are finis-
hed taking the
water out of the
washing machine,
turn the filter
around several
times until you can
take it out fully.
e Remove any
objects or fluff that
may be in the filter.
f Replace the filter
and the base in
their places.
2
CLEANING THE ACCESSIBLE FILTER
In order to avoid burns,
this operation should
not be carried out when
the wash water tempe-
rature is over 30ºC.
IMPORTANT